20 Most Recent 2003 Chevy Astro - Passenger van, with factory roof rails - Base Rack System - Page 7 Questions & Answers

What make/model is your car?

No ,wire wont match

A lot of people have found their manual at this site. https://www.manualslib.com/

Thy this site for the manual that you are looking for. https://www.manualslib.com/

That's usually an indicator light that the system is active...It can also say stay away from the novice thieves but if a pro wants your car you will be making an insurance claim. Pro's will get the car if they want it...

Are you sure that you are pushing the right control button?

If its newly installed the ignition interuption relay may not have been installed. Either that or it has been hooked up worng.

only other thing you can do is check the code.
To check if you have the correct code for programming follow these instructions:

1. wait for the alarm to immobilise itself – IE the LED flashes slowly
2. Turn the ignition on the LED will be constantly on,
3. Turn the ignition off, the LED will now flash, count the flashes for the first number in the override code. For example if the first number is 3, count three flashes of the LED. When the LED has flashed the amount of times that corresponds to the first number of the code turn the ignition switch on.
4. Turn off the ignition and count the flashes for the next number of the code and so on until all the numbers in the override code have been entered.
5. If the code has been recognised the LED will flash very quickly for a few seconds, you are now in programming mode and the alarm is also disarmed.
6. If the LED has not flashed quickly - start again from the beginning.

If the number is ‘0’ count 10 flashes of the LED.

I have a 2006 Rendezvous and I have the Prostart CT-4311TW model and I have the lock/unlock and hatch working but cannot start the vehicle remotely. I too think its the bypass but I am not sure which wire is the ground. I have the DBALL2 bypass model. Any help would be appreciated.

Hi, most cars have a procedure when you fit a new battery, the 1990s Mercedes needed to be locked and unlocked 3 or 4 times before they would start, Range Rover are the same + switch ignition on and off without trying to start it, so you just need the procedure for your vehicle , hope this helps,

https://www.youtube.com/watch?v=DZ5ssi2Zkos

Torque converter clutch is stuck on. Sometimes an additive can help. If not the pan will need to come down,

if you need any auto parts you can find them here>>www.discountbargainprices.com

you shud be able to find a new remote here or universal one that fits your unit>>www.discountbargainprices.com

See below for specific description; but, I would guess your battery has a short. Maybe, your alternator/charging system is overcharging and is essentially boiling the battery internals. F06 The charger detected that the battery may be getting too hot (thermal runaway). The charger automatically shuts the current off if it detects the battery may be getting too hot or the battery may have a shorted cell. Have the battery checked or replaced.

Try here https://chrome.google.com/webstore/detail/browse-manuals/hogjdcdnnjbjbbicpgmhkhkiemhbacml

https://chrome.google.com/webstore/detail/browse-manuals/hogjdcdnnjbjbbicpgmhkhkiemhbacml

Need a manual? https://chrome.google.com/webstore/detail/browse-manuals/hogjdcdnnjbjbbicpgmhkhkiemhbacml

https://chrome.google.com/webstore/detail/browse-manuals/hogjdcdnnjbjbbicpgmhkhkiemhbacml

May find the answer in a manual https://chrome.google.com/webstore/detail/browse-manuals/hogjdcdnnjbjbbicpgmhkhkiemhbacml

https://chrome.google.com/webstore/detail/browse-manuals/hogjdcdnnjbjbbicpgmhkhkiemhbacml