20 Most Recent Netopia (3347NWG-ENT) Router (3347NWGENT) - Page 4 Questions & Answers

Try a hard reset (small button on the back of the router, usually recessed and accessably using a paperclip to push it in)

This will restore the router to factory settings. The password and user name will revert back to the factory ones which for netgear is

User Name = admin
Password = password

Then once your into the router settings you can set the username and password to something you want.

Hope this helps

Well ther should be a wirless icon on the botom right corner of your scren right click and say serch for avalibe wirless networks. find the one that is yours. it might ask for a WEP pssword which is on the botom of router. You might have to change some of the wirless adapter setings. just send me a mesage and i would be happy to help.

where it say limited or no connectivety icon on the taskbar just right click and select repair. hope this helps

Do they have there security setup to match your netopia? If your not sure surf to the modems interface 192.168.1.254 go to expert mode and make sure the wireless settings match the settings (wep,wpa, 128 bit or 64 bit,open, shared key, etc..)on the laptop if not change them in the laptop

i would find out what ports are being used it sounds like there are 2 servers being used one is login server that your router is allowing another is game server witch its not.

bloofyx thing - sometimes connects sometimes doesnt - what gives - piece of ****

login to the router.
find where your router has nat settings.
(myns under services)
choose nat rule entry.
add the port and ip and your done :)

You mean what program? Telnet. Here's the quick setup. If it's already been installed and password protected, you'll need to grab the installation guide somewhere else.

http://www.netopia.com/support/hardware/manuals/3347W-ENT_qsg.pdf

Carl

with netopia user name and pass is a must without it you will get nowhere you need isp user and pass for the account most times the user is you account email.

you need to get rid of the registry entry this is why it wont function
goto search engine and search for regvac its free registry cleaner
first though uninstall game if you cant, just delete all files and folders pertaining to game. use regvac in novice mode clean registry and then reinstall. there may just be some old modded info in /programs/game folder that are not being overwritten by fresh install.
by removing and cleaning registry you basically make your pc think the game has never been installed and starts fresh.

did you reset or restart if reset all the info has to be re inputted also if you have isp like bellsouth or at&t they will change pass if the router resets i know this from past troubles with mine but after i stopped resetting and just restarted i was fine lol

first make sure wireless enabled and find out what channel the item your trying to connect to is the same as the router and set both accordingly. I had same problems with security cameras i turned security settings off for wireless and switched everything to channel 6 on router and cam and wet with 806 and works fine had to restart router not reset.

Hi ServiTiendas

To resolve this issue you have to set DHCP client to automatic

If you mean to say, your WEP key or password(network key) to allow your computer to go online wirelessly, you need to access the Netopia's setup page via a browser. From there, you can go or click the wireless section/tab which will give your settings for your network like security key or network name.

no i dont sorry. if i had the two i could find out but i dont have access to any. sorry

that means you cant use the wireless to update.
try pluging your xbox into the modem through the ethernet cable

check this link for port foward configuration

cheers !!!!!

Router Config>Expert Mode>Advanced>Software Hosting>Games>XBox Live. Make sure you select the device (by IP Address) "Select a User(PC) to Host Games and Services: "

well, you might have to go to family settings and change some things in there.
Go to privacy an friends and there is voice and textt and stuff.
make sure it is set to everyone and you shuld be to talk to everybody from then on..
if that is your problem.

There is a great site for setting up routers for specific things. I found a guide for 3347NWG, I hope it is close to the enterprise one.

First you want to go here: Set a static IP on your XBox360

Then check out: Netopia 3347NWG (the static it asks for is the one you just made).

The menus should be similar on the router on that page to what you have. If it is way different I would not recommend doing it since a mistake here can kick everything off of the internet.

Hope this helps.