20 Most Recent Brother XL2600 Mechanical Sewing Machine - Page 6 Questions & Answers

Brother 8200 8500 8500d screen ..just found this on youtube not sure if this will help you out

I believe it is two wires. The cord could be cut and extended any reasonable length so long it is done in accordance with requured regulations.

Basically, whatever materials and method you use to extend the cable must meet the same specifications and safety requirements of the original.

you can either brothers site or online search

try rethreading the needle with loose end toward the bobbin

May just need lubricated. Take a Q-tip and put a drop of light lubricating oil (sewing machine, gun, clipper, 3-IN-1, etc.). Apply to Y shaft with Q-tip.

https://www.fixya.com/support/t2397975-brother_se_270d_sewing_machine_bobbin https://www.youtube.com/watch?v=6H-nxhWvtBE https://www.sewingpartsonline.com/bobbin-winder-tire-brother-x55238051.aspx

Contact Brother directly to request the manual.

You can download the manual from the link below:

http://welcome.solutions.brother.com/BSC...

It has diagrams of how to thread the machine.

There is also a FAQ section:

http://welcome.solutions.brother.com/BSC...

Please update the question & let us know if the information given was useful to you - Good Luck!

should have numbers on the machine to follow. It is about 8 steps. start at 1 and look for 2 and so forth until all numbers have been found. Hope this helps.

Sorry to be the bearer of bad news but it requires the services of a brother technician

Being a person of limited sight! How is this machine threaded as not to cause thread knotting & tangling?

Sure if you know how,,, Narrow foot or zipper foot

In some cases. thicker needle and tension adjustment. Tweaking

It's an industrial machine. You use a stand-alone bobbin winder.https://www.amazon.com/bobbin-winder/s?k=bobbin+winderLook, no bobbin winder.https://www.ebay.com/itm/264059721244From my EXTENSIVE research on your behalf, it was an optional attachment.Contact Us ' Brother Solutions Centerhttps://support.brother.com > contacttopOthers. Support & Downloads. Contact Us ... Before contacting Brother, we recommend that you refer to the FAQs available for your Brother product. Submit.....

Oil it

Sound like a tension problem..or thread stuck somewhere? need more info

Possible problem is the bobbin inserted the wrong way round. I'm not familiar with this model, but if you've checked the upper threading, and it's still bunching, make sure the bobbin thread feeds off the bobbin correctly (e.g. either to the right, or to the left, as it's inserted). Hope this helps.

I'm not sure. Here is a video offering reset instructions for another computerized Brother sewing machine. Give it a look and see what might be transferable to yours. Normally, you can reset specific functions by going through the menu via a right click on an icon. But I am uncertain about resetting the entire computer to factory defaults. I don't see information about such on the Brother Support page nor information about the machine other than a long list of accessories. When I search the Pacesetter PDF below for "reset", I just find resets for functions. If there is a combination of screen presses that reset the machine, I think you will have to get that from Brother support. https://www.youtube.com/watch?v=Mdk5J8w6yJ4 https://www.brother-usa.com/virdata/product_downloads/consumer/pacesetter%20bes3%20manual.pdf

Need more info? Is the foot pedal plug inserted as far as can go? Sometimes, the plug or jack is simply incompletely inserted. It may look like it's inserted, but it isn't. Turn power off machine. Remove pedal jack from the plug and reinsert fully. Turn machine on. If that doesn't work, have you been using the machine with or without a surge protector? Electronic equipment, including electronic sewing machines, should only be used with a surge protector. Otherwise a power surge can "fry' those delicate electronic components. 3rd. Are you getting any error messages on your display? If you are, those error messages can trigger the machine to shut down until the problem has been identified and corrected. You will need the manual (free on brother.com/support.