20 Most Recent Magic Chef MCD1611ST Microwave Oven - Page 7 Questions & Answers

suggest you ask your local home brewing shop for exact advise

It is broken. You can buy a new one or just heat things up with your stove.

The fuse is internal. Unplug microwave and ope. Casing. Fuse is in the back. Make sure tools used are insulated and touch nothing other than the fuse. I’m happy to help further over the phone at https://www.6ya.com/expert/david_66a56a0239b6ab32

Things You'll Need 30-watt incandescent light bulb Screwdriver Light Unplug the Magic Chef microwave from the wall outlet. Remove the screw from the light cover located on the left side of the underside of the microwave. The light cover is connected to a hinge and will lower, but cannot be removed from the microwave. Unscrew the light bulb, then screw in the new light bulb. hope this helps

is voltage select switch on back near power cord entry set for proper voltage ? 120 for usa and 240 for Europe and Canada also check light bulbs inside they could have gotten broken to cause a shortage

If it doesn't come back on its own, it probably blew its internal fuse. If it blew while the unit was in operation, then I would suggest replacing the fuse holder as well. If it blew when you opened the door, then you may have a bad or mis-adjusted door switch. If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_29ad5d1dd86564b0

Try unplugging the unit for a few minutes. The microprocessor on the control panel may have locked up. Leave it unplugged for at least 15 minutes to see if it will reset. If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_29ad5d1dd86564b0

Hello Miriam; My name is peter. I am a retired field service appliance technician. The reason your micro wave liner is cracking is the way you place the food in the microwave. The rust is coming from the steel frame where the liner is cracked. Go into the following video on how to repair the cracked liner. You can do this. How to Repair Microwave Arc and Burn Marks Touch Up Paint

If you hear the buzz then i would say magnetron. If no buzz just fan I would say diode or capacitor. Google my page sublime appliance repair/microwaves If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61