20 Most Recent
- Page 6 Questions & Answers
Bosch washing machine classiXX Error code E21 changed to E00. What should I do?
E00 usually requires a technician to reset, although you may manually do it by pressing and hold the start button for five seconds the "feature" should disable. E21 is blocked filter or excess of fabric in the filter over time. Turn the appliance off by the main supply, access the filter located on the bottom kick plate. Remove the filter and clean in hot soapy water, check the propeller for fabric debris. Run a hot wash without any clothing 70C or above with 1/4 cup white vinegar, you should do a maintenance wash at least every month and clean and remove the powder draw or detergent draw and inside every 2 weeks, clean the rubber door seal remove coins which are common and build up of debris
on Mar 29, 2019
What does error code f67
I have a Siemens WM16S772DN washing machine and encountered the error code "F:67" followed by repeated beeps. (Note: Siemens and Bosch are related companies). I called Siemens and they said the code means "Fatal error" or program error. The service technician was called, and he replaced the electronic board and reprogrammed it.
on Mar 09, 2019
MY BOSCH LOGICXX8 WHILE WASHING KEEPS COMING UP ITH F37 AND WONT STOP EVEN WHEN IVE UNPLUGED IT PLEASE HELP
The Bosch Logixx 8 washers indicate an F37 error when the temperature sensor is defective. Sometimes this can happen if the incoming water line gets too cold. If that is the case, pressing the temperature button twice may help. (You should see a snowflake in the top left corner of the LCD screen.) Otherwise try thawing the water pipes.
If the problem isn't cold/frozen water lines, then the temperature sensor is faulty, the wiring between the sensor and the control board could be damaged or the control board has a problem getting the temperature information. Check the sensor and the wiring first. Often there is a sheet inside the washer (near the control board) with the expected resistance across the sensor and other parts. Unplug the washer before testing.
Please add a comment with the model of the washer for a parts diagram or price list. If your washer is under warranty, contact Bosch about the error.
I hope this helps.
on Mar 02, 2019
Not finding what you are looking for?