Top 20 Panasonic KXDT333 Phone Questions & Answers

I'm not familiar with this phone, but here is a downloadable manual for this phone. Hopefully you can find the answer it it. https://www.voicesonic.com/panasonic/manuals/KX-DT300/KX-DT333-343-346_Quick_Refernce_Guide.pdf

try this Changing the time on Panasonic phone system

http://www.key-comm.com/kxdt333343346systemmanagersguide.aspx

Here you go mate: Panasonic KX DT333 user manual

You should let know the model And other details

A system speed dial or using a button on the phone as a one touch speed dial? If a button on the phone: press program, press the button you want to use, 9, the number, enter

This usually has to be done by the main programming phone. Usually 101. Program button, *, #, password(default is 1234), 004, follow screen prompts

This is a number being called that does not exist , if it is a programmed button try reprogramming it

http://www.voicesonic.com/panasonic/manuals/KX-DT300/KX-DT333-343-346_Quick_Refernce_Guide.pdfpage 9 depending on the series go into your mailbox & press 3 or 5 for mailbox management, there should be a prompt to change your name/greeting

The system would have set that 165 are the voicemail ports so the voicemail must be plugged into these ports .usually the last extension on the system Once connected dial 164 then 3. 1. 1 and follow the peompts

to record greeting message on your pbx, you need to have COS64assigned to your ext. then press *36 1 501 to record greeting

You can reset it through the admins mailbox, usually 998 or999 you can get to it by dialling the VM access code then # 6 * 999

Sounds like a hot dial is set Press *790 then lift the receiver IMPORTANT do no lift the receiver first

Program **1234 Program step 004 ( or use volume key to find extension name)

Button programming on set. Check Operations Manual for TDx systems.

By default, page resides in the *3301 for zone 1 or *3332 for all page.

When your system was installed, you probably should have been paying attention or asking the installer some questions. Each system is different, but the recordings are controlled from mailbox 998, the message manager's mailbox. The newer Panasonic VM systems assign custom greetings sequentially and usually we put company greetings in the first 3 or 4 slots. They're fairly easy to find and administer if you have a password and some time. Carl

Hello. Here:http://service.us.panasonic.com/OPERMANPDF/KXDT333.PDFYour welcome:)