Top 20
Jabra Stone Bluetooth Headset - Page 5 Questions & Answers
NO POWER TO PANASONIC TV MODEL # TC-P50XT50
Try the powerboard, found it here on this site by searching the model. Be careful about removing the back cover after you unplug the tv and i would suggest using different cups to collect the different screws from each section.
Take care when removing the cables and putting back the cables and you can take pictures before you remov anything to make sure things match up. Good luck!
How do i hook up jabra blue tooth on my apple i
Go to settings on the i-phone then to bluetooth it will automatically search for bluetooth devices close by, get your habra headset and press and hold down the main button for about three to five seconds so the light flashes on and off quickly, this is the pair mode, then once the i-phone has picked up the headset it will ask you for a pin to pair the two devices just enter 0000 it is the universal code for new devices, and you should be right
Toll free number
log in Skype open tools >options > audio settings > speakers> hp(2-..........
It is not being detected
you must make sure you have your blue tooth device turn on to discovery mode most blue tooth devices you just hold the power button for 6 to 10 second when turning on the device,once it is in discovery mode your phone should find it,then you will need a 4 digit pn or pairng code,most blue tooth manufactures use a 4 digit code they are as follows 0000,1234,1111 or 9999 i hope this helps
Ji
I have a Jabra headset
Hi.
A beeping sound normally indicates that the amplifier is low on battery. Normally, battery replacement will fix it.
To have it fixed, you may want to contat Polaris in Australia, they distribute Jabra headsets. They will be able to help you in terms of service. Also, in the warranty card, there should be an information on how to go about the warranty.
You can contact them at 1-800-626-505. Monday - Friday: 8.30am to 5.00pm (excluding public holidays)
Hope this helps.
How to wire a fridge thermostat
Wiring a fridge thermostat typically involves connecting the thermostat to the power source and the compressor. Here's a general guide for wiring a 3-pin thermostat:
- Identify the Pins: The thermostat will typically have three pins labeled 4, 6, and 3.
- Connect the Power Source: Pin 4 is usually the common (C) terminal, which connects to the power source. This could be the live wire from your electrical supply.
- Connect the Compressor: Pin 6 is often the normally open (NO) terminal, which connects to the compressor. This allows power to flow to the compressor when the temperature rises above the set threshold.
- Ground Connection: Pin 3 is commonly the ground (GND) terminal. This should be connected to the ground wire for safety purposes.
4/19/2024 6:14:37 AM •
Radio...
•
15 views • 0 helpful votes
Serial Number for KPG-790
All questions need FULL 'make model (what it is) first 3 words please.
Something to do with this? The serial number should on the label on the rear by the mains cable. This is a statutory requirement unless someone removed it to hide its identity.
https://www.google.com/search?q=KPG-790
..
2/14/2024 9:40:26 PM •
Radio...
•
30 views • 0 helpful votes
Not finding what you are looking for?