20 Most Recent Jabra Stone Bluetooth Headset - Page 2 Questions & Answers


First, put the headset into pairing mode. To do this, remove it from the Stone charger and press and hold the answer/end button until the lights flash four times slowly - this indicates that the unit is off. Then, press and hold the answer/end button again - you'll soon start to see lights flash - hold the button until the green light is on steady and the blue light is flashing. This is pairing mode. Now your Evo should be able to "find" the Stone to pair with it from within the Bluetooth menu on the phone.

Jabra Stone... | Answered on Jan 11, 2012


Remove the battery, wait one minute and put it back.

Jabra Stone... | Answered on Sep 01, 2011


Some Bluetooth headsets will take a while, but if you have had it plugged in for a decent amount of time and still are getting no reaction, you may have received a defective unit. According to the Jabra website, you must notify the company from which you purchased the unit to receive a refund/replacement if this is the case.

Source:
http://www.jabra.com/na-us/support/pages/warantyinfo.aspx

Jabra Stone... | Answered on Aug 26, 2011


Depending on the phone, Some phones need to be set to be visible so that Jabra can find it when it is ready to pair.
I would delete the paired entries on the phone and do a fresh pair to the phone.
Do let me know if you are able to do this or can chat and walk you thru.

Jabra Stone... | Answered on Aug 13, 2011


this is for the stone 1

http://www.jabra.com/sites/mobile/na-us/support/pages/pairingguide.aspx

this is for the stone 2

http://www.jabra.com/sites/mobile/na-us/support/pages/pairingguide.aspx

what phone are you trying to pair with the bluetooth headset?

the default codes for jabra headsets are 0000

Jabra Stone... | Answered on Mar 01, 2011


The headset light turns off when it is at full charge. If it is not charged yet it will be illuminated red.
Found this in the online manual:
http://img5.jabra.com/sites/Jabra/GNimages/Products/Stone_Manual_EN_NA_8404.pdf

Jabra Stone... | Answered on Feb 28, 2011


Hi,

Welcome to Fixya. Yes you can pair the jabra headset to your computer given that the computer has a bluetooth device install on it. Follow the steps below on how to pair the jabra headset to your computer.

1. Turn on your Bluetooth device on your computer.
2. Click "Start," then choose "Control Panel."
3. Double-click on your Bluetooth icon and go to the "Setup" option. It will open up a wizard.
4. Walk through the wizard. In it you will need to place your Jabra Bluetooth headset into a finding/transmitting mode. You will hold down the button on the Jabra headset until it is blinking a solid green.
5. Click "Next" when it is time for finding any Bluetooth devices in the area. This will then find your Jabra headset because it was set up in the previous step.
6. Click "Next" once the devices are paired, and use the headset at anytime.

Thanks for using Fixya.

Jabra Stone... | Answered on Feb 25, 2011


Hi, Look for "Add new device". Hit OK.
the phone will search for a couple seconds. If your headset is in paring mode, it will show up on the phone either with the name of device or something like this [unknown headset] or [b2.c3.f4.56.a1] (called a MAC address).

Either way, select it, and hit OK.


The phone will now ask you for a "Pin" or "Passcode", which is a 4 digit number. Headsets will ALWAYS have 0000 (four zeros) as a pin or passcode. I have never encountered a headset with a different number as a passcode. I have been in wireless for 10 years, and still have not found a headset that has any different numbers.

Enter these four zeros and select "OK"


The headset and phone will connect to each other. The phone will display a message that will be something to the effect of:
"Connected to headset".


I've reviewed Bluetooth headsets before, and I would have to say that the Jabra STONE is one of the sleekest looking. Its shape is designed with minimalist simplicity, with a shape made for either the left or the right ear.

This shape goes onto a charger that is perfectly made to accept the Jabra STONE like a puzzle piece. This charger is probably what sets the STONE apart from most Bluetooth headsets, as it can charge the headset as the user goes. A green indicator means that it has enough charge for one full time or more. The red indicator means that it needs to be charged.

The STONE can be charged with an AC cord or USB connection. Once it is charged, there is a pairing indicator that made it simple to sync with my mobile phone. It has about 12 days (288 hours) of standby time and 8 hours of talk time.

I found that pairing the STONE with my phone was quite simple. In a matter of seconds, it was connected to my phone and I was making my first phone call on it.

The sound for the STONE is pretty good, with dual microphones and their trademarked Noise Blackout Extreme and crystal clear sound and voice with DSP.

One of the big features that I found is the touch sensitive volume control. In other words, there is no buttons for controlling the volume. I welcomed that, and most volume controls on Bluetooth headsets are really, really tiny buttons.

Other features include the ability to connect to two devices at a time, and it can stream music from an A2DP enabled mobile phone.

This is the problem that I had with the STONE. I found that there isn't really a "standby" indicator. I found that using it was a hit or miss situation. If I just pulled it out of the charger, it would sync with mobile it would work. When my phone rang later, and the headset was out of the stone cradle, and hitting the "connect" button didn't help. In short, I had to answer my phone. The Jabra STONE failed me, but I remember having similar awkward experiences when I first used other Bluetooth headsets.

The Jabra STONE comes with the headset, charger, 2 Eargels, a belt clip, AC charger, and a USB charger. You should be able to get it on Amazon for about $90 as the price to this writing.

Jabra Stone... | Answered on Feb 24, 2011


The manual notes that if asked for a pass-key you should use 0000. Give that a try. Hope this helps!

Jabra Stone... | Answered on Feb 16, 2011


not fullycharge batterry... you need to recharge atleast 10hours in you laptop...
thank you...

Jabra Stone... | Answered on Feb 01, 2011


Just did it myself. Ensure the iPhone is discoverable and searching.

Switch the Stone off by squeezing down the control surface until it bliddle-omps.
Put it into pair mode by squeezing the thang again until the bluetooth light flashes. Keep squeezing.
Watch the iPhone - it will pair automatically - no password required.

Jabra Stone... | Answered on Jan 22, 2011


I am having same problem. Stone seems to be charging, but headset will no longer operate. Have used successfully for 5 months.

Jabra Stone... | Answered on Jan 20, 2011


On your phone, make sure bluetooth is turned on (settings, general).

While your phone is in discovery mode, turn your bluetooth device on and put it in discovery mode (usually you have to hold the power button for 7-10 seconds).

Your phone will find the device, and you will be prompted to enter the devises PIN number (often 0-0-0-0). Your phone should pair with the device then.

Jabra Stone... | Answered on Jan 04, 2011

Not finding what you are looking for?
Jabra Stone Bluetooth Headset Logo

77 questions posted

Ask a Question

Usually answered in minutes!

Top Jabra Radio Communications Experts

Bobby G
Bobby G

Level 2 Expert

212 Answers

Damen Wong
Damen Wong

Level 3 Expert

1950 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Jabra Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jabra Radio Communications

  • Jabra Radio Communications

Most Popular Question

just recieved jabra t820

  • Radio Communications
Loading...