Jabra BT650 Bluetooth Headset Halo - Page 4 - Answered Questions & Fixed issues

Hold the power button down until it either beeps or the indicator light stays lighted (this usually indicates pairing mode, might want to check manual to verify). Once headset is in pairing mode, go to phone's blue tooth settings and choose "pair" or "search for devices". This is pretty much the standard method for pairing devices using BT technology.

tengo un nokia lumia 521 y quiero usarlo republica dominicana y me pide un codigo

call HP service center to check for hardware and software compatibility.

some headsets have issues with some phones and work well with other brands find a headset that your phone model recommends

Did u try lowering the volume from the device which ur using ?

CHECK THE BLUETOOTH CONNECTIVITY VERSION OF YOUR HEADSET AND YOUR CELLPHONE

log in Skype open tools >options > audio settings > speakers> hp(2-..........

Go to settings on the i-phone then to bluetooth it will automatically search for bluetooth devices close by, get your habra headset and press and hold down the main button for about three to five seconds so the light flashes on and off quickly, this is the pair mode, then once the i-phone has picked up the headset it will ask you for a pin to pair the two devices just enter 0000 it is the universal code for new devices, and you should be right

Have you tried charging it overnight and turning it on in the morning?

Same problem did you call the 800 number?

Hi.

A beeping sound normally indicates that the amplifier is low on battery. Normally, battery replacement will fix it.

To have it fixed, you may want to contat Polaris in Australia, they distribute Jabra headsets. They will be able to help you in terms of service. Also, in the warranty card, there should be an information on how to go about the warranty.

You can contact them at 1-800-626-505. Monday - Friday: 8.30am to 5.00pm (excluding public holidays)

Hope this helps.

you must make sure you have your blue tooth device turn on to discovery mode most blue tooth devices you just hold the power button for 6 to 10 second when turning on the device,once it is in discovery mode your phone should find it,then you will need a 4 digit pn or pairng code,most blue tooth manufactures use a 4 digit code they are as follows 0000,1234,1111 or 9999 i hope this helps

The default passkey for this headset is 0000. Hope this helps =)

GET A VODAFONE CHARGER!THIS MIGHT SOLVE YOUR PROBLEM!

this is bad.sorry,bat you not have to do nathing,sorry

Wiring a fridge thermostat typically involves connecting the thermostat to the power source and the compressor. Here's a general guide for wiring a 3-pin thermostat:

1. Identify the Pins: The thermostat will typically have three pins labeled 4, 6, and 3.
2. Connect the Power Source: Pin 4 is usually the common (C) terminal, which connects to the power source. This could be the live wire from your electrical supply.
3. Connect the Compressor: Pin 6 is often the normally open (NO) terminal, which connects to the compressor. This allows power to flow to the compressor when the temperature rises above the set threshold.
4. Ground Connection: Pin 3 is commonly the ground (GND) terminal. This should be connected to the ground wire for safety purposes.

I recommend RadioReference.com, they have detailed lists from all over the United States. In addition to frequency lists, they also include live audio, HAM radio lists, licensing information and a lot more.