Top 20
Jabra BT650 Bluetooth Headset Halo - Page 9 Questions & Answers
No power output on usb coba 148 gtl
Check the capicator on the power supply which is only working on the SSB
mode. Many of the 148's had a bad cap installed at the MFG.
Sorry, I don't have the schematics available right now, but it is easy
enough to find.
7/25/2021 12:53:35 AM •
Radio...
•
58 views • 0 helpful votes
Open a yb-500a sandelford safe
I Personally don't think that these should be sold as "safes", but that is a discussion for another thread
5/1/2021 7:28:26 AM •
Radio...
•
325 views • 0 helpful votes
When using CB single sideband... should I be able to pick up the same signals on AM or visa versa. If not, why would that be happening?
Yes and no. You will have to tune your clarifier and you should be able to tune out the loud am signal and hear it unless a person on the am side is 1k or more off. Unless you have a unlocked clarifier. For more information on unlocking it you can go here... https://www.angelfire.com/wv2/whiskeyvictorydx/clarifiermods.html I dont know what model you are using but this will give you some more info. Also, you wont be able to understand side band on am but you can tune in some am stations on side band. Now their is a way to get double side band which is called am side band....i wont get into that but you can view a little about that here.... https://youtu.be/gEB7JEX3wg4
3/7/2021 3:22:52 AM •
Radio...
•
94 views • 1 helpful votes
What is Ant Radio Service?
https://www.google.com/webhp?
It is a radio station especially for Ant Colonies.
ANT Radio Service
is a system service
that was pre-installed by your device manufacturer or added as part of an Android update by your carrier and smartphone manufacturer* to allow the built-in ANT
communication hardware already present in your mobile device to operate. ... See ANT+
in Mobile Devices for more info.
ANT Radio Service - THIS IS ANT
2/28/2021 5:05:24 PM •
Radio...
•
83 views • 1 helpful votes
I turn on my Bearcat III 15x and I get no calls. But it scans, I have tried the weather option and it doesn't stop on the local weather channel either. What can I do to recieve call on the scanner?
scramblepad Mar 08, 2021 Delete
Local Police,some fire and Ambulance, Sheriff and State Police have switched to digital mode which this scanner does not have the capabilities of decoding. To check to see if it works grab a family radio and have the scanner in search mode in the 460 mhz band. Start talking or keep the family radio transmitting until the scanner stops on the channel and talk to see if you hear anything. Another very active band is the ham radio band on 2 meters [ 144.000 - 148.000 . Scan that band and I am sure you will get activity. Very active is the APRS [automatic packet reporting system ] frequency of 144.390 which will sound like a bunch of buzzing tones because it is not voice but data and you can decode it. Another active part of the ham band is 146.520 which is the calling frequency. Fire / rescue seem to use both digital and analog, in my area analog is used 70% of the time. Why the weather band does not work is a bad sign. You should be able to get at least 1 channel. Try to search the 162.00 - 163.00 band. If you get nothing you may have a bad antenna,cable or a bad connector or all 3. You can check the antenna cable with a ohm meter to see if their is no shorts or opens. Hope this helped some and let me know how things are. Take care for now, Kevin
3/8/2021 12:11:53 AM •
Radio...
•
55 views • 0 helpful votes
Not finding what you are looking for?