20 Most Recent Sony VAIO VGNNW240F Notebook - Page 5 Questions & Answers

try it in another usb slot.or maybe the mouse is faulty,or faulty usb ports.

if its not charging then replace with new

battery may be faulty replace with new.

if you know what you are doing you can,if not its always best to get a new one to be safe.

sorry to say but you have got problems you will need to take it to a shop to get sorted out. you may be better off geting new laptop.

you may have to unistall the sound driver thats in there and then try dowloading new ones. pluse make sure you are getting the right driver.

try using a lens cleaner disc,or check you graphics settings and the drivers.

if its over heating check the fan and if its not running very well you will need to clean it out.i find the best way todo this is with a hoover just put it to the side of the fan and try and suck the dust out,if this does not work you will have to open it up to clean it.or it could be the prosser over heating and if it is you will need to replace the heat paste on top of it.good luck.

have you tryed starting up in safe mode?

You might be able to find what you're needing here: http://www.eserviceinfo.com/index.php?what=search2&searchstring=Sony+Vaio+repair+manual.pdf

Pending that you have files on your D: Drive that you don't want to lose, DO NOT FORMAT YOUR DISK. Formatting will erase all information on the drive and set it back to RAW settings. If you aren't sure if you have BitLocker or not, if you didn't install it yourself, you don't have it. Recommended Actions as follows: 1) Open "My Computer" or "Computer" 2) Right Click on the D: Drive 3) Go to the bottom of the list & click "Properties" 4) Click on the "Security" tab 5) Click the "Edit" button between the two boxes A second window should open. It is set by default on "Authenticated Users" 6) Click the box beside "Full Control" If you wish, do the same for "Administrator"

1) Open Control Panel 2) Click 'System & Security' 3) In the Upper Right Hand corner in the Search Bar, type "System Restore" (Without the Quotations) 4) Choose Option "Restore system files and settings from a Restore Point" 5) Choose a restore point that was created before the time frame that you lost your configuration. This option will not only restore your system settings but your personal settings as well.

There's nothing switching the display. the back of the screen is usually a bank of white LEDs behind a diffuser or a white florescent flat tube. That is what you are seeing. In front of this is a layer with each pixel point represented by a blue red and green LCD cell. When current is applied the structure of the LCD becomes amorphous and the light shining from behind lights up the pixel through a polarising screen. If you can see the white backlight then some thing may have gone drastically wrong with the display. that's unusual because normally the display is all 'off' when the display is at rest (no current). So either your display/ video output is in serious trouble or it's another issue that I can't answer because there's not enough info. You may need to take it to a repair technician to assess the situation in person.

What version of windows do you currently have? Xp / Vista / 7 ?? Also is it 32 bit or 64 bit? Go here to find out: Control Panel\System and Security\System

Go to my computer and see if it reads the stick if it does open it from there and see the pictures

Go to filehippo and down load a free webcam utility.

Hi Hussein, Here's a link from Microsoft, assuming you're using Windows 7. Installing and reinstalling Windows Windows Help Here's a walk through on how to do it, again, assuming you're using Windows 7: Hope this helps!

If it is a web page it may be protected over a graphic that will not print. Try making a screen copy and paste it into a graphics editor such as paint. Then try and print it.