20 Most Recent Lexmark Interpret S405 Wireless All-in-One InkJet Printer - Page 9 Questions & Answers

if you can...please return your old firmware version and please don't listen to any official Tech support because they care only for taking your money:(
...P.S. Please by yourself a new LASER printer and stop using this kind of "INK SHITs)
pifonski

The fax is possibly sitting in memory on the printer.
Go through the menu options and fax memory

Hello, get it downloaded at : www.nodevice.com/driver/company/Lexmark/Printer.html
www.lexmark.com/
www.driverslab.com/drivers/Printer/Lexmark/9/63.html
Jaya_Gint

You can get the software on the link below

http://support.lexmark.com/index?page=product&segment=DOWNLOAD&productCode=LEXMARK_INTERPRET_S405&locale=en&userlocale=PL#1


Good Luck

You can use the Lexmark 100A's or the 100XLA's for refilling purposes (available in Lexmark.com). However, once refilled, it can no longer report its ink level. Also, print quality may not be the same as genuine Lexmark cartridges. Visit the Lexmark website for other ways to save money on ink. Thanks.

I had a similar problem with a new printer I just bought. You may need to download the software/driver on-line. My situation is that the software that came on the disc with the printer was encrypted for Windows XP 64 bit and my system is Windows XP 32 (whatever that means!!). When I used the software from the disc, the printer driver would not load, so I went to the website (HP in my case), downloaded the software and driver, installed it, and it worked. I was shocked cuz I really don't understand that stuff, but was happy that it worked! Hope this helps!

It sounds like the printer is having problem recognizing the printhead. If you're getting "Printhead Error", make sure you have the latest firmware update. You can download and install it from Lexmark at http://bit.ly/adzmDq. If you continue to have trouble, contact Lexmark technical support. Thanks.

Here's an article on How to Collapse/Lower the Operator Panel on the Pro200, S300, S400, S500, and S600 Series Printer Models. Just click on this link: http://bit.ly/cnSmox. Follow the instructions in the article. Thank you for choosing Lexmark.

Click here Click on above link download driver for your printer for your operating system. Then copy it to usb flash drive then you can install driver with that usb flash drive so you don't need cd rom. Let me know if you need further assistance. Thanks for using FixYa.

If your wireless network is secured, the WPA or WEP security encryption key is a requirement to successfully connect the Lexmark printer to a wireless network. These keys (WPA or WEP), if you don't know it, can be obtained by accessing your wireless router through the computer. Your wireless router manufacturer or your internet service provider can better assist you in obtaining that info. Thanks.

go to the nearest refiling station, then watch them how they will refill, then got yah! your next refill will be done by you.

The 956.02 error on your Lexmark 792 printer indicates a system board issue. Troubleshoot it step by step: Power off the printer: Turn off the printer and allow it to remain powered off for 10 to 20 seconds before turning it back on. Check the code level: You can identify the current code level using either of the following methods: Method 1: Print the Menu Settings Page: Touch the Menu button on the printer's operator panel. Select Reports. Choose Menu Settings Page to print the page. Look for the code level under Device Information. Method 2: Use the Printer's Embedded Web Server (EWS): Open a web browser (such as Internet Explorer) and enter the printer's IP address. Click on Reports and then select Device Information. Download and install the latest firmware: If your printer's code level matches any of the following: For C792: LHS1.HC.P129 or LHS1.HC.P130 For X792: LHS1.MR.P131, LHS1.MR.P135, or LHS1.MR.P135a For X925: LHS1.HK.P136a Proceed to download and install the latest firmware. If your printer's code level matches any of the following: For C792: LHS1.HC.P131 or later For X792: LHS1.MR.P135b or later For X925: LHS1.HK.P136b or later Contact Lexmark Technical Support for service. Update the firmware: Download the latest firmware from the Lexmark Support website. Save the file and extract it to the same directory. Use the appropriate Authorization Keycode: For Lexmark C792: c792 For Lexmark X792: x792 For Lexmark X925: x925 Update the firmware using one of the following methods: Embedded Web Server (EWS): Open a browser, enter the printer's IP address, and select Settings > Update Firmware. USB utility: Follow the detailed steps for updating via USB flash utility. USB thumb drive: Refer to the steps for updating using a USB thumb or flash drive. FTP: Follow the steps for updating via FTP. If you need further assistance, please contact Lexmark Technical Support. When calling, have your machine/model type and serial number (SN) ready. 956.01 system board error ' Lexmark C792 Error Codes > Lexmark > X792dtse > Code 956.02 (printcopy.info)