20 Most Recent HP Officejet 6500 AllInOne InkJet Printer - Page 6 Questions & Answers

Have you recently removed or replaced the cartridges? Try removing and reinstalling them. Then unplug the printer to reset it and remove the error. See what happens.

Scan one side of document, print that side. Flip document and scan, then follow printer directions for printing other side of document on first printed document.

In the online manual for the printer we can see how to do the restore factory settings reset. Press setup > Press 6 > Press 3 This displays the tools menu. Select the restore factory defaults. http://h10032.www1.hp.com/ctg/Manual/c00241244.pdf In this link we can see how to perform a partial reset. Take out the ink cartridges before this one. Unplug the power cord from the back of the printer while the printer is turned on > wait about 30 seconds > Press and hold the # and the 3 > reconnect the power cord to the back of the printer while still holding the # and 3 buttons > release # and 3 after the printers starts to boot up. Insert ink cartridges when the printer asks for them. HP Customer Support

How can send fax HP Officejet Pro 8600 Plus All in One Printer

Try to turn it off, open cover and move carriage a little bit by hand; don't push too hard. For some time it'll get back to life.

Might be a paper size issue, dirt on a paper sensor or drive rollers need a clean.

Check if your document has empty lines at the end. Use your keyboard down arrow to scroll past the last line of text. Then backspace until you get to the last line.

Try using baby wipes, I know that sounds funny but it does work or get some isopropal alcohol from a chemist.

Check to see if the rollers are turning as could be either needs cleaning or something stopping rollers turning

One of the little tricks many folks don't know is that HP, Xerox, Ricoh, Cannon, Sharp, Kyocera and the other printer/copiers out there all have a web interface. If your printer/copier is on a network, just open a browser and type in the IP address of the printer where you normally type in"www." A website should open and if you use the admin login password from your user/admin guide, you can enter all the email addresses you want from the comfort of your keyboard.

office jets top covers lift up then the cartridge carrier moves to a spot where you can remove them. there should be a step by step in the owners manual or you can get on line and there might be a guide under the cover when you open it up.

if you had a piece of paper and there were pieces missing from the piece of paper 1 of them might be touching the sensor arm. You have to look real good to find it. you may need a pair of tweezers to remove it.

Check the printer settings (software that came with the printer) which will be available on your computer, just in case you need assistance you can call 1-877-805-1027

Remove driver(s) and reinstall. Also do a hard reset on printer>pull plug while printer is on. Then press and hold power button for about a minute. Plug back in and turn power on.

Possible causes for your problem according to HP official website:

• Manual feed mode is turned on.
• The paper tray is empty.
• The paper length guide in the main input tray is not snug against the paper.
• The pickup roller might be dirty or damaged.
• The paper is wrinkled, folded, damaged, or has ragged edges.
• The paper is too moist, too rough, too heavy, or too smooth.
• The paper has the wrong grain direction, is of short-grain construction, is embossed, or is from a faulty paper lot

Try downloading user manual and see if there are any troubleshooting options Download Free Manuals

Hello, From the printer control panel display, touch and slide your finger across the screen and then touch Setup. Then open Tools. Look around the tools menu to see if there is any language change. If there isn`t any just reset the printer to factory defaults.Use the link below and page 39 http://ecx.images-amazon.com/images/I/D1QEFw7XJ6S.pdf

In the print option menu under more options or advanced you will see the set up for envelope printing.

Active Directory has nothing to do with the printer. It is a function of Windows Server networks.

https://www.youtube.com/watch?v=jSPXV3anp8E