Power Acoustik PTID7002NR Car DVD Player - Answered Questions & Fixed issues


No the format is an mp4 it's Avi the codec has to be Xvid size 640x480 was having same problem with mine now videos work good all you need to do is download http://www.wisevideosuite.com/wisevideoconverter.html. I found a free version of it on cnet.com
2_2_2019_3_29_46_am.jpg

Power Acoustik... | Answered on Feb 02, 2019 | 283 views


I download a music video and music and 3 movies but when I tried to plug in it says unsupported format

Power Acoustik... | Answered on Jan 14, 2014 | 127 views


I have music video and 3 movies download on my USB and when I tried to plug in it says unsupported format.

Power Acoustik... | Answered on Jan 14, 2014 | 261 views


The company advises that you should contact them to receive that information. They want to ascertain that you are the legitimate owner. You can reach them at:

tech-support@poweracoustik.com
800-832-4647 x293
Mon-Fri 8:00AM - 4:30PM Pacific Time

Power Acoustik... | Answered on Apr 26, 2012 | 82 views


hi,
You have to check the wiring of the Main speaker. By i means you have to check the "wire" for the main speaker from the payer to the speaker. If you have use 4 speakers then you have to check all the wire of 4 speakers. Because if any one of the wire touch to the ground (chase) any where due to the bad insulation the the player will not out the audio. It will sence the short with the groun and will switch off the ouput amplifier. My be the wire is touching some time that why its works for weeks and then go off. Also you have to chek the leads of the speaker is there is any conact to the ground (chase). Also check for any short between the speaker wires. If so this will happen. This will not affect the sub. That way its work perfectly.
ok

Power Acoustik... | Answered on Aug 07, 2011 | 69 views


You can use a USB Flash drive or SD/MMC Card or an iPod to view files (Pictures,Videos,Music files..etc) in the player.Touch the icons [USB], [SD CARD], [IPOD] according to which device you are using.The corresponding modes are switched automatically by the player when it detects one of the above devices.The player will switch to [RADIO] mode automatically when the above devices are disconnected and if there is no Disc in the player or to the [DVD] mode if there is a Disc inserted.You can view the detailed description in the following link ( http://www.poweracoustik.com/pa2006/manual%20and%20catalog/source/PTID-7002NR.pdf ).Your valuable feedback would be appreciated.Good Luck.
tinualbinale_14.jpg

Power Acoustik... | Answered on Jun 04, 2011 | 563 views


Once you plug in your iphone and set it to play your song(s). Set your car player for AUX this will then pick up the device playing into the direct port. Hope this helps Fix ya up.

Power Acoustik... | Answered on May 13, 2011 | 404 views


Sounds like going over the tracks might have knocked a wire lose behind the dash. The only way to know would be to take out your head unit to reveal what's behind it. Make sure all the cables are securely fastened and it should work again.

Power Acoustik... | Answered on May 03, 2011 | 107 views


Try tuning it in manually then press and hold the relevant preset button till it beeps or stores the frequency.
I hope I have been of help but please do not hesitate to ask if you have any further questions.
I appreciate your vote if you appreciate my reply and remember, even if you don't vote for me a
please and thank you goes a long way.

Power Acoustik... | Answered on Mar 05, 2011 | 93 views


where do you live?

Power Acoustik... | Answered on Feb 26, 2011 | 128 views


I called Power Acoustik in Ca. and they have them for $45 323-722-3333

Power Acoustik... | Answered on Feb 16, 2011 | 281 views


Please replace the screen then. It is very hard to get repaired.
Regards, Jay

Power Acoustik... | Answered on Jan 26, 2011 | 88 views


The device may be failing.

Power Acoustik... | Answered on May 05, 2010 | 111 views


Search google for a schematic should be able to find one. I repair amps. Marks Car Audio & Amp repair
e-mail skinnman33 @gmail.com I can be reached at 727-266-6398 Let me know

Power Acoustik... | Answered on Apr 01, 2019 | 38 views


It depends on how many channels are on the Amp. If it's a 2 channel you can bridge it using the positive on one channel and use the negative on the other channel. The Amp will give the sub more power bridging the sub.

Power Acoustik... | Answered on Mar 10, 2019 | 130 views


Long press the button

Power Acoustik... | Answered on Feb 06, 2019 | 99 views


Power to battery. Ground to something in trunk. Remote to blue lead on radio. Rca to line or sub out on radio.

Power Acoustik... | Answered on Sep 14, 2017 | 105 views


Fixya does not sell replacement volume (control) knobs.

Power Acoustik... | Answered on Sep 12, 2017 | 76 views

Not finding what you are looking for?
Power Acoustik PTID7002NR Car DVD Player Logo

Popular Tags

33 questions posted

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Audio & Video Experts

Dalynn Turner

Level 2 Expert

346 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

The Knight
The Knight

Level 3 Expert

76046 Answers

Are you a Power Acoustik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...