Top 20 Power Acoustik PTID7002NR Car DVD Player Questions & Answers

I download a music video and music and 3 movies but when I tried to plug in it says unsupported format

I have music video and 3 movies download on my USB and when I tried to plug in it says unsupported format.

No the format is an mp4 it's Avi the codec has to be Xvid size 640x480 was having same problem with mine now videos work good all you need to do is download http://www.wisevideosuite.com/wisevideoconverter.html. I found a free version of it on cnet.com

The company advises that you should contact them to receive that information. They want to ascertain that you are the legitimate owner. You can reach them at:[email protected] 800-832-4647 x293 Mon-Fri 8:00AM - 4:30PM Pacific Time

You can use a USB Flash drive or SD/MMC Card or an iPod to view files (Pictures,Videos,Music files..etc) in the player.Touch the icons [USB], [SD CARD], [IPOD] according to which device you are using.The corresponding modes are switched automatically by the player when it detects one of the above devices.The player will switch to [RADIO] mode automatically when the above devices are disconnected and if there is no Disc in the player or to the [DVD] mode if there is a Disc inserted.You can view the detailed description in the following link ( http://www.poweracoustik.com/pa2006/manual%20and%20catalog/source/PTID-7002NR.pdf ).Your valuable feedback would be appreciated.Good Luck.

hi,
You have to check the wiring of the Main speaker. By i means you have to check the "wire" for the main speaker from the payer to the speaker. If you have use 4 speakers then you have to check all the wire of 4 speakers. Because if any one of the wire touch to the ground (chase) any where due to the bad insulation the the player will not out the audio. It will sence the short with the groun and will switch off the ouput amplifier. My be the wire is touching some time that why its works for weeks and then go off. Also you have to chek the leads of the speaker is there is any conact to the ground (chase). Also check for any short between the speaker wires. If so this will happen. This will not affect the sub. That way its work perfectly.
ok

Once you plug in your iphone and set it to play your song(s). Set your car player for AUX this will then pick up the device playing into the direct port. Hope this helps Fix ya up.

Sounds like going over the tracks might have knocked a wire lose behind the dash. The only way to know would be to take out your head unit to reveal what's behind it. Make sure all the cables are securely fastened and it should work again.

where do you live?

Try tuning it in manually then press and hold the relevant preset button till it beeps or stores the frequency.
I hope I have been of help but please do not hesitate to ask if you have any further questions.
I appreciate your vote if you appreciate my reply and remember, even if you don't vote for me a
please and thank you goes a long way.

Please replace the screen then. It is very hard to get repaired.
Regards, Jay

I called Power Acoustik in Ca. and they have them for $45 323-722-3333

The device may be failing.

Question edited for a lot more clarity, full make model (what it is)'. Question moved from Televisions category. The warning message may have been useful! People don't realise that factory car audio is operated by and monitored by the Body Control Module (BCM) on a computer network. Your warning chimes and indicator clickers are generated by the BCM and played through the car audio system. The computer has no idea that this new device is! Take it to an auto electrician or to an Alarm / Audio installer and see if their professional bi-directional grade scan tool computer can reprogram the BCM to ignore your device. Or just put the old one back. ..

Running straight power from the battery suggests there's another option, as for instance running mains power... How could having two ground wires work, please?

That usually happens when the switch is dirty. You can flood it with electrical contact cleaner. Also make sure the speaker connections are good and the polarity is correct. https://www.google.com/search?q=power+acoustik+pd-651b+makes+popping+noises ..

Question edited for clarity. The way I read the product specs, it needs an amplifier? https://poweracoustik.com/product/pd-624b/ https://www.google.com/search?q=Power+Acoustik+PD-624B ..

1. Make sure the disc you are trying to play is compatible with the radio. The radio may not support certain formats or types of discs.
2. Check the disc for any visible damage, such as scratches or fingerprints, that may be preventing it from playing properly.
3. Check the CD player for any debris or foreign objects that may be preventing the disc from being read properly.
4. If you are using an aftermarket CD changer, make sure it is properly connected to the radio and functioning correctly.

POWER/MUTE Button Press it to turn on the unit.Press and hold for 2 seconds to turn the unit off . Press the button briefly to Mute . Please note that the volume will be muted on all audio output connector.

From. My. Radio. Can. U. Show. M. What. Pin. Is. What. Color. Of. Wire. To. A. Power. Acoustic. Modelptid8920b