20 Most Recent
Canon PowerShot SX210 IS Digital Camera - Page 9 Questions & Answers
How to fix E32 error on canon powershotSD1300IS
This error normally comes when your Canon camera lens gets stuck in the barrel itself. There are some steps which can be followed to resolve this problem which as follows,
STEP 1: Switch on the camera while you hold the shutter button and connect it to the AC adapter or to the USB cable at the same time.
STEP 2: Now by default the lens should get properly aligned if not try to twist them slightly by holding down the camera lens with soft hands.
STEP 3: Just push and pull the lens slightly as it extends automatically.
STEP 4: Now when the lens is in the hard surface power on your camera.
STEP 5: Try to hit the camera softly beside the lens which might solve the issue.
You can try to format the memory card completely and then reinsert to your camera which might be the issue at times.
All of a sudden my power Shot SD1000 Digital Elph is taking blurry pictures. HELP.
Camera shake is more likely the reason. These cameras do not have image stabilizers so a steady hand is a must. A mini tripod is a great item to use. Or just sit it on a ledge and press and see if it is any better. Also setting it on self timer (while on the ledge) gives the camera a chance to be stable without you touching it. Hope this helps. Also check what setting you have it on.
Format feature does not light up
Check your shooting mode. Some features are available for a given mode only. If you set your camera to a pre-programmed mode, many features will be greyed - not available.
Set the date and time on sx700canon
- Go to the camera menu, scroll through to "Date/Time"
- Press the left/right arrows to choose an option field (month/day/hour/minute)
- Adjust that setting by pressing the up/down arrows or using the dial
- Select SET/OK when done
Instructions are located on page 147 of the user's manual. You can download a PDF version of the manual from Canon's website.
Canon sx210is wont power on
Battery contacts could be insulated with light grease from hands etc. Try using a small throwaway nail file to gently clean the contacts on the camera.
Not finding what you are looking for?