20 Most Recent Hitachi Cpx2510 Projector Cpx2510 Xga Projector Lamp Questions & Answers

the lamp is broken ,yuo need a new one We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry Lampdeng Limited

1,Check the fans ,whether the fan is running,when you turn on the projector 2,if the fans run, then ,check the lamp or lamp ballast We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry Lampdeng Limited

it sounds like you have a broken power board

hi,
Its because you projectors lamp have to replaced. It is notifying that you have to replace the lamp. if you wish to use the same lamp then you have to reset the lamp hour timer. it is recommended that you have to reset the lamp hour only after replacing the lamp. do the following for reset you projectors lamp hour.

(1) Press the MENU button to display a menu.

(2) Point at the ADVANCED MENU in the menu using

the up arrow/down arrow button, then press the right arrow button.

(3) Point at the OPTION in the left column of the menu
using the up arrow / down arrow button, then press the right arrow button.

(4) Point at the LAMP TIME using the up arrow / down arrow button, then press the right arrowbutton. A dialog will appear.
(5) Press the right arrow button to select "OK" on the dialog. It performs resetting the lamp time.
ok

hi,
Check the lamp cooling fan of your projector . may be its has some problem. its not running at the correct RPM. Do one thing, Remove the fan from the projector. In the fan there will be a specification sticker. Remove the sicker. now you can see a hole in the center. its the bearing part of the fan. put one drop of oil in it. u can use any type of lubricating oil. rotate the fan leafs with finger for some time. after that re-stick the spec sticker. insert the fan in the projector. power ON the projector and watch.

Also check the air filter. try to clean the air filter.
ok

Yes, as bulbs age they will begin losing brightness. Most projectors have a bulb life hour clock, that measures the number of hours a bulb has been used. Usually you can pull that up within the menu of the projector. Also that particular model has what is called "Eco-Mode" and when engaged dims the bulb by 25% to cut down on power consumption.

Typical life for a lamp in that projector is:

3000 hours on Normal mode
6000 hours on Eco mode

You can expect a brightness loss of 50% when you are approaching end of a lamps life.

This projector was sold with a 3-year manufacturers warranty. You can contact Hitachi warranty service at 1-800-HITACHI.

If you have a continuing issue or support problems, contact me directly at [email protected].

Power Supply is $50 https://www.google.com/search?q=hitachi+cp-x3030wn+power+supply

CP-X2530WN/CP-X3030WN CP-WX3030WN

Projector Central https://www.projectorcentral.com > pdf > projecto... The information in this manual is subject to change without notice. • The illustrations in this manual are for illustrative purposes. They may differ. 118 pages

CP-X2530WN/CP-X3030WN CP-WX3030WN

Hitachi in Europe https://estadoc.hitachi.eu > servlet > FileViewer The information in this manual is subject to change without notice. • The illustrations in this manual are for illustrative purposes. They may differ. 69 pages

CP-X2530WN/CP-X3030WN/CP-EX250/CP-EX300 ...

Projector Central https://www.projectorcentral.com > pdf > projecto... EW300. Responsible Party Hitachi America, Ltd. Address. 900 Hitachi way, Chula ... Before connecting the projector to a device, consult the manual of the device ... 20 pages

Jika mesin basuh Hitachi SF-105S Anda masih tidak dapat menyala setelah Anda mengganti pcb board control yang baru, maka ada kemungkinan bahwa masalahnya terletak pada pcb power board atau bagian lain dari mesin. Untuk menentukan apa yang perlu diganti, ada beberapa langkah yang dapat Anda lakukan:

1. Periksa kabel daya dan sambungannya untuk memastikan tidak ada kerusakan atau kelonggaran.
2. Periksa bagian lain dari mesin, seperti switch atau saklar, untuk memastikan tidak ada yang rusak atau tidak berfungsi dengan baik.
3. Periksa pcb power board untuk mencari tanda-tanda kerusakan, seperti komponen yang terbakar atau terkelupas.

https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/Fd_-_Error_Code_-_Washer

Fd means Factory Default settings.

A Fd (Factory Default) error code indicates that the washer was set back to factory default settings. To return all options and modifiers to Factory Default, press POWER/CANCEL, select Drain & Spin cycle, and then press Extra Rinse, Fabric Softener, Extra Rinse, Fabric Softener within 5 seconds. When done correctly, the 7-segment displays show "Fd" for 3 seconds and then unit returns to Standby Mode.

It goes with the territory of old technology. There is lots of help in the link. https://www.google.com/search?q=Hitachi+CP-TW2505+LCD+projector+green+hue ..

https://www.hitachi.com.au/documents/dps/CPX301_manual.pdf Apparently, the usb port on the back can be used to plug in a simple mouse and keyboard to control the projector.

BILLY, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

Hi Sam, the temperature light, tells you that the ventilation system is not working properly As a first step, remove the filter (s) and clean them well or replace them with new filters. It would also be important to do an interior cleaning, do not use torches or air sprays, since they can do more damage than solution, always try to vacuum dirt I hope you can make your Hitachi work properly Regards Franco Dosil Hola Sam, la luz de temperatura, te indica que el sistema de ventilacion no esta trabajando correctamente Como primera medida , saca el o los filtros y limpialos bien o reemplazalos por filtros nuevos Tambien seria importante hacer una limpieza interior, no utilices ni sopletes ni aerosoles de aire, ya que pueden hacer mas da?o que solucion, siempre trata de aspirar la suciedad espero Puedas hacer funcionar correctamente tu Hitachi Saludos Franco Dosil

the lamp is not good you need a Original lamp I Supply the Projector accessories,in China. projector accessories:Laser Diode Module,lamp,bulb,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast...with high quality and competitive price. Hope to cooperate with you. Lampdeng Co.,Ltd. (Guangzhou, China) is founded in 2000, is a major supplier of projector lamps www.Lampdeng.com

the Lcd panels are fault or the polarizer isfault I Supply the Projector accessories,in China. projector accessories:Laser Diode Module,lamp,bulb,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast...with high quality and competitive price. Hope to cooperate with you. Lampdeng Co.,Ltd. (Guangzhou, China) is founded in 2000, is a major supplier of projector lamps www.Lampdeng.com

Font strokes are not cleaned Black silk font is not black enough reason: the Lcd panels are fault I Supply the Projector accessories,in China. projector accessories:Laser Diode Module,lamp,bulb,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast...with high quality and competitive price. WhatsApp ID:+8613178867858 Skype:[email protected] Wechat ID:+8613178867858 Email:[email protected] Email:[email protected] Mobile:+86 13178867858 http://www.lampdeng.com

The power indicator is off. two reason: 1,the mainboard is fault 2,the powersupply is fault I Supply the Projector accessories,in China. projector accessories:Laser Diode Module,lamp,bulb,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast...with high quality and competitive price. WhatsApp ID:+8613178867858 Skype:[email protected] Wechat ID:+8613178867858 Email:[email protected] Email:[email protected] Mobile:+86 13178867858 http://www.lampdeng.com

You should clear the air filter and reset the air filter timer and the lamp timer menu-advance-option-reset the air filter menu-advance-option-reset the lamp filter I Supply the Projector accessories,in China. projector accessories:Laser Diode Module,lamp,bulb,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast...with high quality and competitive price. WhatsApp ID:+8613178867858 Skype:[email protected] Wechat ID:+8613178867858 Email:[email protected] Email:[email protected] Mobile:+86 13178867858 http://www.lampdeng.com Posted on May 31, 2019