Top 20 Hitachi Travelstar 5K320 HTS543232L9A300 320 GB SATA Hard Drive Questions & Answers

A driver restore disk works with a windows disk to return your Acer Extensa 5230E Windows 7 back to the original factory setup. Once windows has installed you put this disk into the drive as soon as windows gives you a found new hardware dialog box. Once inserted the Acer Extensa 5230E Windows 7 will automatically find all the drivers and also install most of the original factory software. BEWARE OF GENERIC DISKS ! All Drivers and factory software are operating system specific so you must have the correct software and drivers for your Acer Extensa 5230EWindows 7. Some of the drivers you would find on this Acer Extensa 5230E Windows 7 Restore Disk are listed below. Not all will be applicable to your system as this list is for information only for Acer Extensa 5230E Windows 7 Restore Disk. THIS DISK DOES NOT CONTAIN AN OPERATING SYSTEM! YOU WILL NEED TO INSTAL Windows 7 FIRST OR USE AN EXISTING INSTALL.Hope this helps

Hi Mirel Toma,
You can try and find it here: http://www.hitachigst.com/internal-drives/mobile/travelstar/travelstar-z5k320
or here: http://www.hitachigst.com/support/downloads/
I hope this helps.
Cheers,

Hello if you can bak up your driver using a softwares and explaine with pict from here Get your drivers back then go to drivers back up page
thank you

If you are installing Windows XP or greater on on hardware that is not more than a few years old, you should not need to download a driver, the drives should be recognized automatically during the install.

you have to format your hard drive using a third party disc to erase everything on your hard drive

During the boot process you will see on the screen to press a certain key to enter setup

Press and hold that key during the boot up process to enter BIOS the scroll down to advanced bios features press enter change your first boot device to cd,press escape then press f10 to save to

cmos to restart

note this will erase you operating system you will have to have an operating system disk to load it onto you hard drive or create a partition to load another operating system

(note after you have loaded the operating system you must go back and change the first boot device to your hard drive)

?

???????????????????? hope this helps

Hello Spawn, hi, pop in your Operating System CD rom, (like windows cd rom installer), boot first on the CD drive, usually pressing F11, for PC, then read and follow instructions on the screen.
If you are a PC user, and want to install windows, follow instructions above until the screen reaches where you will select a drive to have your windows installed, after selecting, then the installer automatically formats your drive. Hope this answers your question.

Click start control panel administration tools computer management device manager scroll through all of your devices If you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver if you can see your usb device but its not working scroll to Ports(Com&Ltd) right click to update driver If you computer came with a motherboard disk the drivers could be on it. Rather doing a driver hunt which can take hours http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html Windows XP/Vista/7/8 it might take some time being a freeware driver solution Note: it will find all of your outdated drivers This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point. Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated. Hope this helps.

Use AOMEI Partition Assistant,a free Windows partition software, to clone data or OS from one hard drive to another. http://www.disk-partition.com/copy-disk-partition-wizard.html

Found this,,,,, https://www.justanswer.co.uk/consumer-electronics/c5uh2-hitachi-xl500-won-t-connect-hear-running-no-light.html hope it helps.

You will have to use the HDMI port on the mac. provided you have a HDMI input in the projector

use this? it can backup anything. https://www.2brightsparks.com/download-syncbackfree.html

BENJAMIN, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

buried in endless spam are you. does it fail on 2nd PC???????????????????????????? but yes, I am the MVP of external HDD< I build my own. Have over 5 here for Backups . lots of causes, for sure bad drive, or missing drivers.. bad HW hardware or BAD software SW. Missing 12vdc 2amp power pack>, lost or using wrong one. when pack above does the HDD spin? usb connected to PC. NO PC stated, NO OS stated, windows/chrome/Linux/android? its at lease 10 years old , see posts back that far. not good old HDD,this old. sold during W7 era. 2009. The drive has 3.5" HDD that needs lots of power (Amps) to start up that big motor inside, and is first thing to learn . 2amps it needs, ok? so if pack is missing it will never startup on any USB port, not rated for 20x standard USB load factors. some laptops only do 0.1amps (100mA) and are useless to startup any hdd motor of any kind. see why here. and see a better extremal solution cheap.! $10 http://www.pcdied.com/external-hdd.html

Tried googling for the answer but couldn't find it. Try calling an it support company, I'm sure they'll help you out for free. Perhaps you can try https://www.computersinthecity.co.uk/, they have been helpful to me in the past.

No. http://www.hitachidigitalmedia.com/en-gb/discontinued-products/plasma-tvs/42-106cm/42pd7200

Hi, What is the router/modem model number? Have you tried a different cable? Have you gone into the menu, networking and setup ?

purchase a Roku box

Maybe this will work for you. https://ibm-hitachi-drive-fitness-test.en.softonic.com/

Try to right click the listing. you should get a dropdown where you can repair of reinstall the drivers

try downlolading the driver compatible with win 10 os