20 Most Recent Transcend StoreJet 320 GB USB 20 Hard Drive - Page 8 Questions & Answers

What is a "dvd layer"?

did you you partition it correctly

Depending on the current draw required by an external hard drive, a double usb is sometimes required. Get on at Frys or the like. If it doesn't work, you can return it. Semper Fi, Z

Hi, Try connecting it to another USB port, if it still gives the same problem try another cable, if still the same is it still under warranty?

Absolutely yes. You can do that in Disk Management or in AOMEI Partition Assistant. There should be an option like "Format..." when you right click the partition you want to format.

. I hope this guide has given you some insight on which methods are worth considering and which ones to avoid by all means! http://greencoffeesupremecleanseidea.com/fierce-male-reviewes/

Try this http://www.transcend-info.com/Support/contact_form

Does it make a funny clicking noise while its running?

could be call record buffer.

No, Biostar advertises that you should use low voltage memory on this board. My experience that when 1.5 volt memory is installed in a 1.35 volt system, it is not reliable. (Intermittent Crashes.)

Your computer can format the hard drive. If you want to recover the software on the hard drive you'll have to contact the manufacturer. You can use the drive after reformatting it. The software is on a separate partition so you may be able to recover it by using a data recovery program.

Yikes. This is a bad error to have. This means your HD has crashed and is now unreadable. You can try HD Regenerator and see if this utility will help recover the driver enough so that you can back up your data. http://hdd-regenerator.en.softonic.com/