Top 20 Vivitar Vivicam 8225 Digital Camera Questions & Answers

You don't need the Vivitar software.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

Press the M button to bring up the menu. Use left/right-arrow to select the wrench icon. Use up/down-arrow to select "Date" then select "Set Date."

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as PIcasa.

Use mode button then select movie. Shutter button starts and stops movie taking. Need 4 gB SDHC to get long movie taking.

Try the procedures in this tip.

The 5022 is primarily a still camera, with some video capabilities grafted on. As such it records images not sounds. You can add a soundtrack using video-editing software on a computer, but you cannot record one on this camera.

To focus on your subject, lightly push the shutter button (the button you use to take pictures) only half way down. When you push the shutter button half way down, this auto-focuses the camera and you can then fully press the shutter button to take your picture.

Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program.

Press the OK/MENU button in the center of the cursor pad to access the main menu. If you need a manual, you can download one from the manufacturer's web site at
http://www.vivitar.com/files_products/14/ViviCam_8225_Camera_Manual.pdf

Hi,

Here is a tip that I wrote about how to find the manuals, drivers, downloads andsupport for Digital Cameras.

DigitalCamera Manuals, Drivers, Downloads, and Support How to easilydownload Pictures from Digital Camera
heatman101

;'';

Press the OK/MENU button. Use cursor-left/right to select the wrench icon. Use cursor-up/down to select "Date." Use cursor-up/down to select "Set Date" and press OK/MENU. Use cursor-left/right to move between fields, cursor-up/down to change them. Press OK/MENU when done.

There's no pause. You just stop recording and then start up again.

http://www.vivitar.com/ ...Camera_Manual.pdf
DOWNLOAD FROM THE ABOVE LINK
REGARDS.
PLZ. RATE THIS

Hello and welcome to FixYa!
This following steps allows you to set the system time which will be displayed on the photos.

• Press the Up or Down buttons to select the Date option in the Setup menu.
• Press the OK MENU button.
• Press the Up or Down buttons to select a Date option from the menu that appears

On selecting "On" the date will appear on the photo once it is taken.
On selecting "Off" no date will appear on the photo.
On selecting "Set Date" the Set Date settings screen will appear. You will be able to change the date settings that will appear on the photo once it is taken.
To Set the date:

• Press the Up or Down button to enter the Set Date option.
• Press the OK MENU button.
• Press the Right/Left button to select and highlight the Year, Month, Day, Hour, Minute, Second and Date Format type.
• Press the Up or Down button to set the Date and Time digits.
• Select the first option of the Date format and press the Up or Down button to set the date format that appears on the top line: YY MM DD; DD MM YY; MM DD YY.

• Press the OK MENU button to confirm, save the changes and exit.

You have done it.
I hope this solution helps you
If you have any more query or issue regarding your problem do inform me.
Thank you for using FixYa!

You can view/download the manual from here.

Hope this helps

Ray

You can use SD or SDHC card.

Thanks for using Fixya! Don't forget to rate!

Hi,

Here is a tip that I wrote about how to find the manuals, drivers, downloads andsupport for Digital Cameras.

DigitalCamera Manuals, Drivers, Downloads, and Support
heatman101

The 8225 is designed primarily as a still camera and does not record any sound with video. You can add a soundtrack using a video-editing program on a computer, but you cannot record one on this camera.

Sorry if that wasn't the answer you wanted to see, but there it is.

The 8225 uses one of these.

I suggtes the ViviCam_8225_Camera_Manual

You can adjust the way your camera is setup with 11 setup option: Exposure, ISO, White Balance, Sharpness, Quality, Date, Auto Power off, Frequency, Language, Copy, Format and Default Setting.
1. Press OK in MENU button.
2. Press the Right/Left button to select the right icon.
3. The Setup menu appears in the center of the LCD.
4. Press the Up/Down button to select one of the setup submenu options.

Additional details directly from Email: [email protected]
Or Phone US: 1-800-592-9541
UK: 0-800-917-4831
Australia: 1-800-006-614

Hope helps.