Sony Ericsson XPERIA X10 Cell Phone - Answered Questions & Fixed issues


hello i have a sonny ericsson xperia x8 to unlock SIM.
please help me.
IMEI: 012685003974759
IMEI VERSION:55
rubrorx@hotmail.com

Sony Ericsson... | Answered on Jan 17, 2019 | 5,373 views


Check the battery to see if the sides are bulging in the middle. Do a spin test. Take the battery and put it on a flat surface, then spin it like a top. If it spins at all, the sides are not flat and the contacts are moving away from the contacts in the phone.

Sony Ericsson... | Answered on Feb 14, 2018 | 156 views


there are phone repair shops all over the place that can replace the glass quickly
the glass is fairly expensive but there are different qualities that increase the life of the glass on dropping
ask around , get quotes and consider having a person with experience do the job as it takes very little to break the phone full stop

Sony Ericsson... | Answered on Jan 30, 2018 | 105 views


With the phone on
  1. Start by opening Main Menu next on open Settings folder.
  2. Tap on Privacy and select Factory Data Reset.
  3. Tap on Reset Phone, enter your password (if required) and confirm by selecting Erase Everything.
  4. Let the phone restart and you're done.
With Phone off:
1. Start with the phone off, to do it press Power button.
2. Press and hold both the left and right Action buttons under the display.
3. Press the Power button while the others 2 keys are still held.
4. Follow the on-screen instructions as the phone immediately begins the Factory reset process.

I hope this helps :)

Sony Ericsson... | Answered on Jan 01, 2018 | 62 views


How can I get them back

Sony Ericsson... | Answered on Dec 26, 2017 | 305 views


Hi,
Please take it to an authorized service center and down grade the software.

Sony Ericsson... | Answered on Dec 18, 2017 | 74 views


It's simple to enter the NCK code in the Phone,you need to use the Instructions to enter the NCK code in the Sony Ericsson Xperia X10 phone,find in which Country ,Network it locked now?
Get the Unlock instructions from here
Onlinegsmunlock and Unlock it.....

Sony Ericsson Xperia X10 Unlocking Instructions Warning : Do not enter any wrong unlock codes on your Sony Ericsson Xperia X10 mobile phones. If you enter over a certain amount of wrong unlock codes on your Sony Ericsson Xperia X10 mobile phone, your phone may get hard locked and sometimes become unusable.
1. Switch ON your Sony Ericsson Xperia X10 with a Not Allowed SIM Card.
2. Your Sony Ericsson Xperia X10 will request to enter an unlock code.
3. Tap the box where you have to input the code and a number pad will appear.
4. Type in the unlock code we send to you.
5. Press the 'Unlock' button on the phone.
6. Your Sony Ericsson Xperia X10 phone should now be unlocked.

*NOT ACCEPTED : We mean, to use a sim card from a network other than the network your Sony Ericsson Xperia X10 is locked to.
Each Sony Ericsson Xperia X10 mobile phone has an unique unlock code. You can buy the unique unlock code for your Sony Ericsson Xperia X10 mobile phone using the form above.

Sony Ericsson... | Answered on Nov 28, 2017 | 1,191 views


if service enter people said it was dead , then you need to buy a new phone .we do not second guess others

Sony Ericsson... | Answered on Nov 23, 2017 | 37 views


turn up volume, change ring tone for incoming calls and messages.

Sony Ericsson... | Answered on Sep 03, 2017 | 78 views


Fastest and easiest way, remove your yahoo account from settings, accounts.

Sony Ericsson... | Answered on Sep 02, 2017 | 131 views


you have to go to contact then you have to go management then you can see the option copy all click on that to copy all contact to another sim or device

Sony Ericsson... | Answered on Jun 10, 2017 | 518 views


Sony Ericsson... | Answered on Feb 27, 2017 | 82 views


try to restart your cell so it recalibrite its loc.

Sony Ericsson... | Answered on Nov 17, 2016 | 47 views


Try Last resort or Plan B, they are both Apps but not sure if you can lock it after its gone, maybe able todo something on your Google+ account

Sony Ericsson... | Answered on Sep 28, 2016 | 81 views


This only occurs if a SIM card is inserted

Sony Ericsson... | Answered on Sep 27, 2016 | 52 views


- Unlock all Sony Xperia 2010 Year (under test, private only)
- Unlock all Sony Xperia 2011 Year( with Test Point) (under test, private only)
- Flash All Sony Xperia/ Sony Mobile Android based mobile phones
- First in the World: Read Trim Area from Running OS via ADB( Android Debug Brigde, ADB - included)
- First in the World: Write Trim Area from Running OS via ADB (Android Debug Bridge, ADB - included)*
- Trim Area Backup Read using ADB/BootLoader(for test or Security reason)*
- Trim Area Backup Write using ADB/Bootloader**
- Single Trim Area element Read/Write*

* Not all TA elements can be written or read and not all Platforms support it.
** Not all TA elements can be written or read.

!!!Software require Internet Connection for all operations!!!





download tool
http://www.mediafire.com/download.php?7gede2no6nsccvd

Usage:
!!!IMPORTANT!!! Before any operation with any new phone - Back it UP! Later
you can restore it if somethings gone wrong.

A) To read/write Trim Area
using ADB:
1. Connect your phone to PC using USB Cable.
2. Enable USB-Debugging in Settings->Development menu
3. Install drivers
4. Go to TA work tab, click ADB in the software and press Connect.
If you need to Cancel you can click cancel to stop operation
5. Wait software to check root in your phone and try to root it.
6. If your phone is not rooted you recieve a message how to root
your phone.
7. Click Backup TA. All your TA will be backed up and saved in new
folder, same as your imei number
8. If you need to restore phone - click Write TA from Backup
9. If you need to read/write single element: enter element number in
heximal (for example 7da) and press read/write
9a. Upon write operation you will be asked to open the file to
write, so please be ready for this file to open.

using BootLoader:
1. Training: Connect phone in Flash mode (Hold the back (or the
Volume down in new 2012+ phones)) key and connect the USB cable.
2. Install drivers (x64 or x86)
3. Check if driver install ok
4. Disconnect phone
5. Go to TA Work tab and click Bootloader
6. Click Connect button. If you need to cancel you can click cancel
to stop operation
7. Connect phone in Flash mode (Hold the back (or the Volume down in
new 2012+ phones)) key and connect the USB cable.
8. After successfull connect Click Backup TA (for your security)
9. If you need to restore click Write TA from Backup
10. If you need to read/write single element: enter element number
in heximal (for example 7da) and press read/write
10a. Upon write operation you will be asked to open the file to
write, so please be ready for this file to open.

B) To flash a S1_Boot android phone
1. Go to Flasher tab
2. Follow the procedure 1 of the read/write TA using BootLoader
(Traning)
3. Click Open firmware (acceptable formats: zipped firmware bundle,
with loader.sin inside), file format - zip or 7z (7-zip)
4. Select files to flash(eg. 1 file or All files)
5. Connect phone in Flash mode (Hold the back (or the Volume down in
new 2012+ phones)) key and connect the USB cable.
6. Install Drivers (x64 or x86 - according your system OS)
7. Stand by, software detect phone and send the loader.sin from the
archive
8. Click Flash when phone is connected and software hint says "You
can press the Flash button now"
8a. Keep in mind, the system.sin takes longer at 99%, this is ok,
need wait.

C) To unlock phone
without Test Point (2010 phones only):
1. Training: Connect phone in Flash mode (Hold the back (or the
Volume down in new 2012+ phones)) key and connect the USB cable.
2. Install Drivers (x64 or x86 - according your system OS)
3. Check if driver install ok
4. Disconnect phone
5. Enter your user id and password
6. Click unlock
7. Connect phone in Flash mode (Hold the back (or the Volume down in
new 2012+ phones)) key and connect the USB cable.
8. Follow the on screen instructions (some phones require one or two
reboot).

with Test Point:
1. Training: Connect phone in Flash mode (Hold the back (or the
Volume down in new 2012+ phones)) key and connect the USB cable.
2. Install drivers (x64 or x86)
3. Check if driver install ok
4. Disconnect phone
5. Connect the Test Point.
6. Install Drivers (x64 or x86 - according your system OS)
7. Keep the Test Point connected
8. Click Unlock
9. Stand by.
9a. Longer in description faster in process about 20 seconds.

Sony Ericsson... | Answered on Apr 21, 2016 | 98 views


Hi i forgot my Sony Ericson's xperia x10 screen patter and i forgot my google account too... what should i do ? please help me (T_T)

Sony Ericsson... | Answered on Jul 09, 2015 | 488 views


Default is normally 0000 oe 1234
If you changed it, maybe you can do a factory reset.

Sony Ericsson... | Answered on Jul 02, 2015 | 37 views


my god this phone has a lot of issues try a registry cleaner called clean master I use it to clean my phone it works great

Sony Ericsson... | Answered on Feb 13, 2015 | 41 views

Not finding what you are looking for?
Sony Ericsson XPERIA X10 Cell Phone Logo

1,854 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Ericsson Cell Phones Experts

Damen Wong
Damen Wong

Level 3 Expert

1950 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Marvin
Marvin

Level 3 Expert

84540 Answers

Are you a Sony Ericsson Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...