Element Electronics ELCHW261 26 in. TV - Page 9 - Answered Questions & Fixed issues
Element tv problems hook to computer get no signal
I'm assuming you are using this as an only monitor for the PC...
What resolution is the screen (max) and what are you trying to put into it? If the video output of the PC is too much it won't 'see' it sometimes... try lowering the PC resolution to that of the screen.
If it's a second monitor, you have to go into the screen settings on the PC and tell it to either 'mirror' (or duplicate) the existing monitor on it or extend the screen on another monitor.
Sorry I can't be more specific as I don't know what the screen or PC (computer) is...
4/23/2014 5:36:15 PM •
Element...
•
Answered
on Apr 23, 2014
•
1,196 views
I can not get nothing
I hope you have hooked it to an antenna BOX first , not just the Rabbit ears.
4/19/2014 10:56:47 PM •
Element...
•
Answered
on Apr 19, 2014
•
58 views
No sound on an element flat screen TV
Hi Kristen
try opening menu from the remote, click on sound and follow instructions on the screen for how to put the sound back on.
I hope you do not have the same problem, I once discovered on mine.
I had accidentally pressed the mute button on the remote and no sound.
After having restarted the tv , I sat with remote in my hand and suddenly the sound came on, I i had been pressing buttons just fidgeting.
good luck
kolbrun
3/25/2014 2:39:29 PM •
Element...
•
Answered
on Mar 25, 2014
•
765 views
Directions to hook up tv to cable box .
Set tv on tv input and try 3 . If still not working . Go to tv menu and find set to cable and do auto scan . When done try 3 again . be sure cable bos swith on back is set to 3 and not 4. Hope this helps.
3/19/2014 10:42:22 PM •
Element...
•
Answered
on Mar 19, 2014
•
126 views
Red light blinks
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating, to many popular brand TVs and other devices. Viewing it in "
Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given.
2/18/2014 1:39:07 PM •
Element...
•
Answered
on Feb 18, 2014
•
74 views
Cannot enter channels except by using up and down arrows
Is the remote dirty? Oily? It's easy to dismantle remotes and clean them. Use ordinary dish detergent all parts, except circuit board. Use light alcohol on that. With a paper towel, or clean dry cloth. Dry all parts. Put back together.
2/12/2014 6:14:27 PM •
Element...
•
Answered
on Feb 12, 2014
•
48 views
No picture or sound
Check and replace its main power regulator [SMPS] board. Contact any service technician for assistance. If you wish to get some details, check the site linked here. Pull up older posts. Check the site in '
Mosaic' view. It will make search easy.
http://electronicshelponline.blogspot.com/
1/18/2014 6:26:22 PM •
Element...
•
Answered
on Jan 18, 2014
•
83 views
Not finding what you are looking for?