20 Most Recent Element Electronics ELCHW261 26 in. TV - Page 8 Questions & Answers


If the sound is OK, the fault is with its back-light system. If audio too is absent, the fault is with its main board. If you wish to get some details; visit the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Element... | Answered on Jul 09, 2015


then you have your tv set to over the air not cable look for that in the menu

Element... | Answered on May 11, 2015


if you have the remote an can access the menu set it to cable an then autoscan.

Element... | Answered on May 11, 2015


did you set it to cable an then do a channel scan

Element... | Answered on May 11, 2015


there is always a fuse in all tv's
if the fuse blew then you will most always find some other fried component.

Element... | Answered on May 11, 2015


you cant
its most likely that the lcd drivers attached to the lcd is shot , its because lots of these tvs have no cooling fans so the solders become brittle. or some one hits the front of the screen an it will damage them.
its a trick to fix them if its even possible
other wise the video board has gone south from some capacitor thats dried is 2nd choice.
id not wast the money fixing it because your guess would be wrong most likely.

Element... | Answered on May 11, 2015


now set the menu to cable an scan the channels

Element... | Answered on May 11, 2015


Hi Dan,
Your TV must be in guarantee period. call the service center.

Element... | Answered on May 06, 2015


check vedio in cable & its connector

Element... | Answered on May 05, 2015


May I get the madel # of the direct tv remote to help you more. Is it the RC65 or another model

Element... | Answered on Mar 16, 2015


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
In some models of LCD TVS; the backlight inverter and its T'Con board will be a part of the panel itself, and will be a built-in type inside the LCD panel. If so, they can't be replaced. In this case; a panel replacement is the only repair. For some other models, the backlight inverter section circuit will be a part of the main power supply regulator [SMPS]. To such sets, the power supply section circuit too should be troubles hooted. Contact any service technician. The circuit will differ with models and versions.
Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Element... | Answered on Mar 15, 2015


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Element... | Answered on Feb 25, 2015


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
In some models of LCD TVS; the backlight inverter and its T'Con board will be a part of the panel itself, and will be a built-in type inside the LCD panel. If so, they can't be replaced. In this case; a panel replacement is the only repair. For some other models, the backlight inverter section circuit will be a part of the main power supply regulator [SMPS]. To such sets, the power supply section circuit too should be troubles hooted. Contact any service technician. The circuit will differ with models and versions.
Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Element... | Answered on Feb 24, 2015

Not finding what you are looking for?
Element Electronics ELCHW261 26 in. TV Logo

70 questions posted

Ask a Question

Usually answered in minutes!

Top Element Electronics Televison & Video Experts

Cindy Wells

Level 3 Expert

6004 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

LP

Level 3 Expert

514 Answers

Are you an Element Electronics Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Element Electronics Televison & Video

  • Element Electronics Televison & Video

Most Popular Question

element elchs261 wont turn not even red

  • Televison & Video
Loading...