20 Most Recent
Sanyo DP46849 46 in. HDTV - Page 7 Questions & Answers
I got a new Sanyo
Return the tv for another one for the replacement.This tv have a problems,call a delay prograssive scan.That why u see the jet trails of the previous pictures.This problems,will not go away,but will getting worse and even might have a permanent pictures screen burn of the previous pictures in LCD screen panel too.
Our sanyo lcd tv is a couple of years old and
Hello; I am John at J. D. Electronics, Poland Maine. This problem is caused by a defective LCD panel. This part is very expensive! Aprox $ 1000.00 from Sanyo and less than $400.00 from Encompass Parts Inc.
I just bought a new sanyo 46 inch tv and a
kbluhm,
First I would make absolutely sure that the connection cord is ok. If you have other cables I would try them first. If the unit still does not work I would hook a VHS machine or another DVD up and see if the TV works. If the TV has other inputs, video 2, video 3, etc I would advise trying them. If after eliminating the inputs and the DVD as the problem then I would take the TV back to the store and have them show you that the input works or does not. Obviously if you have a good cable, and a good DVD the unit should work.
Thanks for using FixYa and for the great rating.
hardrocko
I have a 46' lcd sanyo... we have sound but no
The tv less than a year old?Call the hot line in the owner manual for warrenty repair.The tv Tuner board have pronlems,that the board,where the coalaxial broscasting signal cable plug into it.
Play station remote hit the screen, now it looks cracked .
Yeas I would say this is a possibility, unfortunaly in most cases replacing the LCD module of a screen is too costly and replacing the screen is often the only avenue. If you have home and contents cover you might be able to get a new TV that way. Alternativly try ebay for a replacement screen module, this will require you dismantling your TV to get the part number.
I NEED A NEW FRONT PANEL FOR A SANYO 46
For Panels you do have to contact Sanyo at 1-800-877-5032, most of the time they will not sale parts to anyone unless they are a service center. The Panels are pretty expensive and dont know if you want to put the money it the tv, but you can contact sanyo and they can atleast give you a price. If there is no CORE value on the part, we will be happy to order it for you, since we are a service center, and can have it shipped to you directly. Hope this helps.
I bought a Sanyo DP46849, lcd tv, 1080. and I'm
I gather from the information given that you are getting the proper signal from the cable receiver but there may be a settings issue with the LCD TV. If the 720 plasma is giving good performance then it has to be settings on the lcd .
I would review the instruction manual to see if you have over look something that is a proper cable select ( hdmi or vga).
If you have selected vga you will not get a clear picture in that mode. HDMI is High definition which works properly with 1080P mode. If you have further issue the manufacturer troubleshooting or Knowledge base will give answers also.
1. check your HDMI cables make sure they are properly seated in the input ports
squarely not at an angle.
2. If you are using a cable receiver check the connection there. Make sure you have the proper cable for your receiver to the TV
3.check channel to see if you TV is selected for channel 3 or 4 as recommend in the instruction manual
4. check the V-chip setup it may be blocking certain channels
5. check you picture modes each channel can have desire picture setup modes.
6. If you are using rca cables you may not get the proper picture as you would with HDMI cable that are specially designed for High Definition TV
Not finding what you are looking for?