All questions need FULL 'make model (what it is)' or this happens.
Error codes E-9. The batteries may be out of power. Turn the meter back on. If you are in a cold environment, move to a location with a more moderate temperature and retest.
Question edited for correct form of the maker name.
Power cycle both units. Remove mains plug from both for 5 minutes and reconnect. Make sure the television is set the HDMI Source to the Decoder.
The universal remote code for Astron TV can be programmed using the following list of codes:
672
673
075
094
091
000
0048
0042
0041
To program your universal remote to work with your Astron TV, follow these steps:
Aim your universal remote toward the Astron TV.
Press and hold the "SET" button until the small light on the remote control illuminates.
Enter the remote code using the numeric keys.
Upon entering the correct code, the remote light will turn off.
For Astron TVs, the Chunghop universal remote is recommended due to its compatibility and easy programming. Alternatively, you can try a GE universal remote, but you'll need to program it without specific codes.
If you encounter any issues with your Astron TV remote, such as it not working, consider resetting it to factory settings.
1 .Picture Mode: Explore different picture modes on your TV. Some modes might have preset configurations that affect brightness. Choose a mode that suits your preferences
2.Advanced Settings: Look for advanced settings or options related to color temperature, gamma, or dynamic contrast. Tinkering with these settings might provide more control over the display.
Check if the volume knob on the DVD player is stuck or damaged. If it is, try cleaning it with a soft cloth and see if that helps.
If the volume knob is not the issue, try cleaning the laser lens inside the DVD player with a cotton swab and alcohol. This can help remove any dirt or dust that may be interfering with the player's operation.
If the above steps do not work, try resetting the device by holding down the power button for about 10 seconds. This action refreshes the system and closes all running processes, potentially resolving the glitch. If this does not work, I suspect you would have to have a repair shot take a look or consult customer service of the device.
You are attacking this back to front. The Universal Remote is irrelevant, it is all about the the television make NOT the remote. Not that anyone uses Universal Remotes any more! And they aren't 'access codes' they are Remote Codes. Have a read
https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote
..
Question edited for clarity.
The LED light is a standby light and is on all the time the set is powered on by its On switch.
All sets have Buttons on the set itself, they are either on the lower left or right edge, or the latest craze is to put them on an angled panel on the rear of the set.
If you have a smartphone, you can test the remote. Aim the front of the remote at the front facing selfie camera whilst in photo mode and press the On button on the remote. You should see a red flash on the phone screen.
Try a Power Reset. Remove the television wall plug for 5 minutes and then plug it back in.
..
Television is set to the wrong Source. Or the dog pulled the HDMI cable out.
'make model (what it is)' in all questions please, first 3 words. In your case also for the television so 7 words with 'and' between.
You can try a power reset. Unplug from the mains wall socket for 15 minutes and plug back in. If it is IPTV, reboot the Router.
https://www.google.com/search?q=decoder+showing+green+light+but+not+responding
..
My normal response is no you can't. This is because mobile phones don't have an infra red transmitter. However there is one phone that does. Also if the television is a smart television, it can be controlled via the wifi connection.
A model and make would be helpful but considering 90% of the sets we see with a dark screen but has sound is defective backlights, I'd pull the panel out and get at the strips and test them
If you're having trouble getting your OTA channels to work on your ProView 3200 flat screen TV, there are a few things you can try:
Verify that the antenna is correctly and securely plugged in by checking it. Try raising your over-the-air antenna if you're using one, ideally so it's close to a window. To determine out which way your antenna should be pointed, you may also use an online station finder.
Restart the TV: Press the power button to turn off your TV, then disconnect it from the mains, wait two minutes, plug it back in, and press the power button again to turn it on. Try launching an automated channel search on your TV after it has restarted.
In the event that your TV is still unable to pick up channels, check the tuner and make sure the coaxial line is in working order.
I hope this helps you restore service to your OTA channels!
Question edited for a lot more clarity and toss in some CAPS.
Page 27 of the menu refers to the Parental Controls Code
https://www.manualslib.com/manual/559309/Westinghouse-Vr-4625.html?page=27&term=Parental+Control&selected=1#manual
The ATSC Code mentioned here
Q: Why do I need to enter a tuner code for my television to receive over-the-air broadcasts?
A: The access code input enables Westinghouse to accurately count the end-users who seek to enable the ATSC tuner, for purposes of royalty reporting (but for the end-user, this activation is free). This looks to the future of television design: Digital televisions are beginning to include installable hardware or software features.
https://www.google.com/search?q=Westinghouse+vr-4625+ATSC
..
