Top 20
Polycom CX400 IP Phone Questions & Answers
How do i reset my voice mail password
Voicemail systems are a function of the PBX that the phone is connected to, not the phone itself. If you do not have administrative access to the PBX, there is no way to reset the password from the phone unless you know what the password currently is. What kind of premise PBX or hosted PBX service is the phone connecting to?
12/18/2014 6:57:44 PM •
Polycom...
•
305 views • 0 helpful votes
Set ethernet
Transmission circuit is responsive, however the speaker seems to be defective or the receiver section has failed. This is an internal function whereby the unit requires inspection by a technician to correct the issue at hand.
2/26/2014 5:14:51 PM •
Polycom...
•
92 views • 0 helpful votes
In polycom VVX1500 ip set
Hi,
One-touch speed dial or redial is one feature of this Polycom VVX1500, and as far as I know you cannot create a list on the screen.
3/24/2010 8:21:57 AM •
Polycom...
•
79 views • 1 helpful votes
Polycom IP501 and SPA2102 Router
If you know how eo access your configuration control panel then assign a Static IP address or place that assigned address on the other side of the firewall (DMZ). Steve Medley
11/1/2008 11:45:44 PM •
Polycom...
•
158 views • 0 helpful votes
Onity machine error showing no valid data connect to pc , what can i do for that ...
Here are some steps you can take to troubleshoot and resolve the issue:
Connect the Machine to Your Computer:
First, ensure that your Onity key machine is properly connected to your computer. You can use either a USB or Ethernet connection, depending on your machine's configuration.
Be cautious not to damage any of the connections while setting up.
Launch the Access Control Software:
Once the machine is connected, launch the access control software provided by Onity.
Double-check that all the information (such as username and password) is correctly entered.
Select the "Reset" Option:
From the software's main menu, choose the "Reset" option.
You'll be prompted to enter an authorized user ID and password assigned to the machine's operator account.
After verifying these credentials, you can enter the reset mode.
Input New Credentials:
While in the reset mode, input new credentials for the machine.
Set a unique password and click "OK".
Remember this password, as you'll need it each time you use the key cutting device.
Confirm the Reset:
Confirm the reset by clicking "Yes" on the confirmation prompt.
Wait until the process completes successfully.
The machine will reboot automatically after a few seconds.
If you encounter any issues during this process, consider reaching out to Onity Tech Support for further assistance.
I can't leave a comment after logging in..
Anywhere in particular? You seem to managing just fine here!
https://www.fixya.com/users/atos-maximus
For some strange reason you are answering Solved questions from August 2012??
..
Not finding what you are looking for?