Top 20 Lenovo G550-29583AU Notebook Questions & Answers

Email Lenovo support staff, I thin it is free.

If these beeps aren't while booting up, then there is software program notifying you of something. It could be a system beep for just about anything and isn't easy to find without hands on. You can do a little research on your own - checking your installed programs for notifications. You can open your event viewer where everything your system does is recorded minute for minute (tedious but works) Problems show with either a yellow triangle with a ! in it or a red button. The program gives a short description - not detailed but it could give you an idea where to look. It's difficult to assume anything with the limited information given but suffice to say, if you're in windows, it's not a boot issue.

1)have you cleaned RAM slots if not clean them and try or else 2)Try to start in safe mode if problem persists 3)open BIOS during boot and check temperature of CPU and tell me details 4)also send me your hardware configuration and how this problem started

Download and install the display driver from the link below: http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g550-notebook

try to open the back of laptop and check for any HDD power cable damage

Have you made any modifications to the computer lately? (Taken it apart ect?) I had a similar issue with mine. There was a short in the keyboard. I ordered and installed a new keyboard and it has booted up fine ever since. Try something as simple as checking the keyboard connection, this will require taking the laptop apart though.

Hey, Did you manage to solve the problem? I've got my g500 too, and cannot scroll with the touchpad... Can you help me?

please use application to connect wireless speaker

1.Type devmgmt.msc in start search box and hit enter2.In device manager, expand display driver3. Right click on it , click on Unistall4. Reboot the computer

These WEB sites may help you remove the hard disk password. HARD DRIVE PASSWORD UNLOCKING - Purchase http://www.hddunlock.com/purchase/ A-FF HDD Unlock Wizard (HDD Password unlocking - Free) http://www.hddunlock.com/download/

WEBcam image problem Most WEBcams have a setting to mirror or turn the image upside down etc. Go to your WEBcam setting to set your image back to normal.

Start computer in Safe Mode - Command prompt - type rstrui.exe, and then press ENTER. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

try going into bios and see if it has a menu to diable it/enable it

maybe you have a loose connection and maybe this is causing the flickering. i suggest you look at the cable connection behind your screen and make sure it is locked. (clip lock cable)

HIPlease informed the specification of your laptop. Like OS.Pleaes follow this instruction.-> Try to use your laptop on adapter not battery.-> Try to Scan the computer with your antivirus.-> Also disable all the startup from MSCONFIG.Just type MSCONFIG in RUN. Then go to Startup Tab.. and uncheck those programs which is not requried during boot.Incase you have any trouble please get back to FIXYA

Welcome to FixyaIf you are referring to the BIOS password then there is no other way to unlock that. You need to send in you computer to lenovo Depot repair department. The number is 18774536686.Thank you for choosing Fixya! If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

G550 The keyboard has a separate numeric keypad. To enable or disable the numeric keypad, press the Num Lock key.
Reference user manual: http://download.lenovo.com/UserFiles/UserGuide/en/User's%20guides%20and%20manuals/G450-G550/Lenovo%20G450-G550%20User%20Guide%20V1.0.pdf
I do this for fun & 4 thumb feedback, not $$$$
Jim

Install the driver then use cyberlink youcam software.

Follow these steps: Restart your computer in MS- DOS mode. When you get to the C:\> or C:\WINDOWS> prompt, type DEBUG and press Enter.A hyphen (-) prompt will appear waiting for you to enter commands. Enter the following commands, pressing Enter after each one. Note: the o is the letter o and stands for OUTPUT. o 70 2 e o 71 ff q After the q command (which stands for QUIT) , enter Exit. Then try to enter your BIOS at bootup. The password prompt should now be gone and you should now have full access to it again. However, you will now be at the default BIOS setttings and may want to change them to your preference.

Turn on your system, then start tapping the F8 function key several times during the boot period.You should get a short text menu.If you can get that far, choose 'Safe mode' which will load only the minimum of drivers and this will often allow you to examine the system for problems.Your Desktop won't look as accustomed since it will be shown at the lowest video resolution and this will make the icons must larger and more crude but this is normal.You didn't mention which version of MS Windows you have installed so continuing from that point is not the same for each but you should have a late enough version to have Restore available. - Click on 'Start.'- Then choose 'All programs.'- Look for and click on 'System Recovery.' - On that short menu, click on 'System Recovery.'Continue from there and if the Restore tracking has been active (it is by default), you should have several earlier dates to choose from.Select one of these to try to achieve a file condition that will allow you to reboot to a healthy system again.