Top 20 Hyundai 2003 Elantra Radio / CD Player g62077233h AM-FM-stereo-cassette Topeka, Kansas Questions & Answers

The brake switch is activated by the brake pedal. It is slightly adjustable. You can move the switch closer to the pedal or if the return spring for the pedal itself is sagging, you'll need a new spring.

Have you checked your handbook? It probably has a code that must now be entered to activate. Its an anti-theft measure

Did you try resetting the Radio / CD? You may need the Radio Security Code, so make sure you have it. https://www.google.com/search?q=hyundai+i20+reset+radio ..

I surprised people still burn cds...time for a new radio the laser might not read mp3

I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 yearsmust try this bitman and reliable-store. Both are good

No reset but they can repair it.

Search and look at manuals for sale on eBay. https://www.ebay.com/itm/2013-Hyundai-Elantra-Owners-Owners-Manual/142829421165?hash=item21414c026d:g:8GYAAOSwWKdbHeaw https://www.ebay.com/itm/2013-Hyundai-Elantra-Owners-Manual-7741-82/273062618330?hash=item3f93cce4da:g:QfIAAOSwIspafdXT https://www.ebay.com/i/312122302141?chn=ps

Color codes for 2004 hyundai sonata stereo wiring Yahoo Answers Try this link. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box. http://electronicshelponline.blogspot.com/

try the Hyundai sellers

Tengo un estereo de nissan modelo po hm5064h-01 y no tiene la clavija del cableado, como se puede saber en cual pin soldarle los cables

When you disconnect your battery and then reconnect itagain, it disables the radio. This is an anti-theft protection for your carradio. The enable your radio the activation code is in your vehicle owner's manual. Ifyou do not have this code you need to go to your vehicle manufacturer's servicecentre and get them to enter this code for you.

NO....if it is covered by warranty they should not charge you even one cent to find and correct the problem Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Radio code is specific for each and every car. It is specific like anti theft code. You can get it by providing your VIN# and registration details in authorized dealership. Nobody else can provide you. If anybody can provide you that , then there is no meaning of security for your car.

Take it to Hundai. They will reset it for free.

Contact the dealer closest to you or instll another stereo. Only options you got now

This problem seems to be common in Hyundai i20 with AVN sold in India.
My i20 with AVN also has the same problem. The Hyundai dealer is not able to solve this issue. He has replaced the AVN system also, with no luck.
I suggest you contact your dealer to rectify this issue.
regards, Pradeep

Still under warranty? Check that. Are you try with other cd? Here said to try unplugging the unit from the DIN cable, and plugging it back in after about 10 seconds. That's the only other reset procedure. If worse comes to worse, you may have to have it sent out for repair, which any dealer can do.

Keep us updated.

The procedure to remove the radio out of the Hyundai sonata dash is as follows:-- 1) First of all on the bottom passenger side there is a screw on the left side towards the center control for the A/C temp control. 2) Remove the screw off and remove it off the Rod. 3) Then remove the Ashtray and pop out the coin holder.You will see two screw under the coin holder remove the screws to loosen the Auto-shifter trim. 4)You will see more two screws,remove that screws also,these screws are holding the trim. 5) Once you remove the trim,you will see the screws holding the radio.Remove those screws and take the radio out. 6) While removing the dash trim.Please take care you dont pull it hard to remove.There is a heater wire under the glove box that everyone forgets to remove and just pull the dash trim.This breaks the wire.So disconnect this wire from dash trim,then slowly lift the dash trim towards you. ----------------- 1) Disconnect the negative battery terminal to prevent an accidental short circuit. 2) Un-clip and remove entire panel surrounding radio. 3)Remove (4) Phillips screws securing radio. NOTE: The rear support bar in the sub dash will need to be cut and removed for after-market radio clearance. 4)Before disconnecting any wire from radio to dash,just be careful that you mark its positions,this will help while reconnecting the receiver to its position. --------------- This will help.Thanks.Helpmech.

Check your service manual, I would also try to google a wiring diagram online. If you can't find which fuse is for radio I would check them all to see which is blown.

Rylan

Unfortunately, no one knows or is telling. Companies rarely state power in RMS because Peak Power is a much more impressive. 1000 watt amp, 200 watts RMS x 2 channels at 8 ohms. Look for a sticker on the unit. https://www.google.com/search?q=Xplore+Amp+5553 ..