20 Most Recent Kenmore 24 in. 15932 Built-in Dishwasher - Page 9 Questions & Answers

0helpful
1answer

Dishwasher motor is making a

if the noise is a grinding kinda clunking noise thed there is some hard food down in the sump/motor assm.you would need to take it apart and clean it out.
11/27/2008 4:17:39 PM • Kenmore 24 in.... • Answered on Nov 27, 2008
0helpful
1answer

Detergent cover

whats the model number?
11/25/2008 1:46:19 AM • Kenmore 24 in.... • Answered on Nov 25, 2008
0helpful
1answer

The top rack on my kenmore dishwasher is not cleaning the dishes!

Pump is clogged a little.
11/25/2008 1:45:37 AM • Kenmore 24 in.... • Answered on Nov 25, 2008
0helpful
1answer

Dishwasher stuck in drain cycle

Whats the model number?
11/25/2008 1:40:20 AM • Kenmore 24 in.... • Answered on Nov 25, 2008
0helpful
1answer

Detergent compartment doesn't empty out during washing cycle

check your fill valve.
11/23/2008 8:18:02 PM • Kenmore 24 in.... • Answered on Nov 23, 2008
0helpful
1answer

I can't get the plastic screw off the wand of my dishwasher

hold the Screw and turn the sprayarm

11/23/2008 8:17:28 PM • Kenmore 24 in.... • Answered on Nov 23, 2008
0helpful
1answer

Will not fill up with water

Clogged ore bad water inlet valve. It's called a star head screw. buy a star bit.
11/23/2008 6:26:32 PM • Kenmore 24 in.... • Answered on Nov 23, 2008
0helpful
1answer

Turn on the dishwasher and it doesn't fill up with water

Bad or cloged water inlet valve!
11/23/2008 6:23:25 PM • Kenmore 24 in.... • Answered on Nov 23, 2008
0helpful
1answer

Overflow

Clogged Sink Drain!
11/23/2008 6:18:04 PM • Kenmore 24 in.... • Answered on Nov 23, 2008
0helpful
1answer

Kenmore quiet guard 4 dishwasher, is making a humming noise

Generally, the filters are removable.  You'll need your manual.  Nothing can get into the motor...but they can get into the pump.  Remove all the racks, get in there and find the item...likely a small bone or toothpick or that plastic bread closer.
11/20/2008 3:23:08 PM • Kenmore 24 in.... • Answered on Nov 20, 2008
0helpful
1answer

Our dishwasher won't advance when it is turned on.

Sounds like the timer needs to be changed out.  The motor is defective or the unit is jammed.
11/20/2008 3:21:23 PM • Kenmore 24 in.... • Answered on Nov 20, 2008
0helpful
1answer

Dishwasher will not drain

The problem is likely the solenoid that diverts the water from the washer arms to the drain.  It is located in the motor areal of the unit and is connected to the waste line.  It is either defective or clogged.  Many of these units can be disassembled and cleaned.  Try that first.  If not, replacement is not difficult.
11/20/2008 3:18:34 PM • Kenmore 24 in.... • Answered on Nov 20, 2008
0helpful
1answer

Washer will not start up

wash motor is jammed or loose wire connection.
11/16/2008 9:41:07 PM • Kenmore 24 in.... • Answered on Nov 16, 2008
0helpful
1answer

Water does not go into dishwasher

first make sure the water is turned on to the unit(i know but i gotta check)if you'r sure you have water pressure to it.the float may have gotten stuck in the full position.this is located in the tub under a cover,that kinda looks like a small silo.remove the cover & make sure it is at the lower end of its movement.if this does'nt fix the problem i'll need a little more imfo.thanx for using fix-ya.please rate all replys
11/16/2008 12:08:54 AM • Kenmore 24 in.... • Answered on Nov 16, 2008
0helpful
1answer

Thanks for your help

you can get it from sears.com
11/12/2008 1:42:57 AM • Kenmore 24 in.... • Answered on Nov 12, 2008
0helpful
1answer

Kenmore Ultrawash QuietGuard 3 Dishwasher not draining or rinsing

Hi Claire,
Are you using rinse aid?
that may help with the film.you may also have stuff down in the trap causing the water to drain slow.
11/7/2008 7:24:37 PM • Kenmore 24 in.... • Answered on Nov 07, 2008
0helpful
1answer

Kenmore dishwasher 665-16829000, #72 on control panel not going away

does it always say 72? will it start? you could have a stuck key on the consol.
11/5/2008 7:47:09 PM • Kenmore 24 in.... • Answered on Nov 05, 2008
0helpful
1answer

Kenmore QuietGuard

any lights on?
11/5/2008 1:08:09 AM • Kenmore 24 in.... • Answered on Nov 05, 2008
0helpful
1answer

The sensig is on, and can't get back to normal cyle to wash dishes

try to just push the cancil button 2 times that should cancil anything he did if this does not work then you have a problem with the dishwasher
11/4/2008 1:12:13 AM • Kenmore 24 in.... • Answered on Nov 04, 2008
Not finding what you are looking for?
Kenmore 24 in. 15932 Built-in Dishwasher Logo

291 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

vince

Level 3 Expert

2530 Answers

Paul Carew

Level 3 Expert

3807 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenmore Dishwashers

  • Kenmore Dishwashers

Most Popular Question

kenmore dishwasher

  • Dishwashers
Loading...