Top 20 Jabra SP700 Bluetooth Car Kit Questions & Answers

The SP700 user guide can be found here: Jabra SP700 User Manual

Bluetooth might have been defected in the electronic board. you can isolate problem by try it on different phone. if the problem follows, drained all the battery and then recharged and try it again. If this still does not work you might want to think about invested money on newer one. Hope this help. terry

Here you go:

http://goo.gl/zloqm

The Jabra pin code is 0000

You've probably accidentally put it in locking mode. Here's what the manual says about it, and how to get out of it:

Locking mode

To prevent accidental key presses that could turn your speakerphone

on e.g. while carrying it in a bag, the speakerphone can be

turned into locking mode. Press simultaneously the Answer/End

button and FM button for 4 seconds while the speakerphone is

turned on. The speakerphone is now turned off and can only be

turned on again by pressing Answer/End button and FM button
simultaneously for 2 seconds.

Look here.
Hope it's what you're looking for.
Regards, Carlos

Hi,

You can download the user manual which has the detailed instructions for pairing and turning on the device by clicking this link.

Also, you can view the video demo on the manufacturer's website by clicking here

• You'll require Adobe PDF Reader installed on your computer to view this manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa

Finally found a website that offers the charger and ordered it.

Just hold the power button on jabra and dont realese till it stays on one colour or starts to flash diffrent colours then search on your phone blutooth and enter 0000 for passcode and your paired.

Be sure the the headset or car kit in in 'Pairing' mode.
When in pairing mode, the light should be flashing red and blue or have a steady blue.
The put most headsets in pairing mode, turn headset OFF, then hold the power button until it goes into pairing mode as discribed above.
Then you can discover it with your phone or PC. Pin (pass key) should be 0000 (4 Zeros) or try 1111, 1234, 9999

Go to tools or tools and settings. Scroll down to blue tooth setting. Make sure the Bluetooth is on and near you phone, The phone should recognize the bluetooth and will ask if you want to pair them. Just click yes and it should work.

you have to start your Jabra Bluetooth and then on your phone Bluetooth and search when you find your Jabra Bluetooth then click on and pairs

I can offer for you turn on "Youtube" find how resembling some smart phones. Information you'll get adapt for yourself.

Try this bluetooth pairing guide.http://www.jabra.com/support/bluetooth-pairing-guide

i got the same problem. hope sum1 knows whats wrong cuz i dont.

After registering the bluetooth device ( in the settings> accessory settings> register bluetooth device) you must then go to the audio options in the settings >accessory settings >audio options and switch the input from do not use to use to the name of your bluetooth to turn on the connection from the bluetooth to your ps3

I have three extra ear hooks email me [email protected]

After having the device recognized by the PS3, just go all the way to the right where your friends are listed and select "Start Chat" and select voice chat (it is not necessary to invite anyone into a chat to do this). Go to the little Tool Box for "Chat Settings", then select "Audio Device Settings" and make sure the Jabra BT2080 is selected for Output and Input.

If anything, I found a video that shows you how's it done attached.

Have you already tried to put your headset in pairing mode first? Anyway, to do it, starting with it turned off, press and hold the on/off button for some 5 seconds, until the indicator light is steadily lit (it will flash as it was being turned on, but don't release the button at that phase). Then, make your phone'sbluetooth application search for new devices. After a while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros);
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.
Hope you are able to sort your problems out.

4x 0 is the code