20 Most Recent
Sony W595a Cell Phone - Page 3 Questions & Answers
Sony Ericsson W595 Cellular Phone.
Hey, all you need to do to get the W595 in phone mode, is to plug it into your PC with the USB cable. When you do that, your phone beeps and stuff, and gives you all the modes you can be in. Which is 4. Phone mode is right at the top. :)
Instruction manual
Go to www.gsmarena.com and after specifying your phone model and make you will get a page where one of the options is User Manual (in pdf format). Download it.
Malfunctioning after getting wet due to rain
Take the battery out of your phone and put your phone and the battery inside of a bag full of dry white rice. Seal the bag and leave it for 24-48 hours. After that time, take it out and see if the keys work like normal again. (White rice absorbs moisture quickly and will dry out your phone quickly)
Thanks for asking.
-Josh
W595 sony ericsson froze and now wont turn on
the exact same thing happened to me. i was in london and had low reception and that and i thought if i turned it off then back on it would be better again but now i just vibrates for a second shows the sony ericsson logo then goes black but the buttons keep lighting up and vuvrating but not turning on.
i dont know whats wrong but i think it has something to do with the battery so im going back to the shop i bought it from and ask them about it (lost reciept though :L) i might have to buy a new battery for it (everyone is saying something to do with an alein thin on the battey)
Phone pin unlock code
Contact the carrier that the phone was purchased from. They will need the IMEI to provide you with the correct unlock code.
Sony Hbd tz510 remote code
The remote control code for Sony HBD-TZ510 home theater system may vary depending on the brand of the remote you are using. Here are a few common remote control codes that may work:
To program your remote, follow these steps:
- Turn on your Sony HBD-TZ510 home theater system.
- Press and hold the "Code Search" button on your remote control until the indicator light illuminates.
- Press the "DVD" or "AUX" button on your remote to select the device you want to program.
- Enter the four-digit code using the number buttons on your remote.
- Press the "Power" button to test if the code is correct. The device should turn off if the code is correct.
- If the device turns off, press the "Enter" button to save the code. The indicator light will turn off.
- If the device does not turn off, repeat steps 4-6 with a different code until you find the correct one.
Note: If you do not have the original remote control that came with your Sony HBD-TZ510, you may need to purchase a universal remote control that is compatible with your device.
Not finding what you are looking for?