Proton MS-42 LCD TV - Answered Questions & Fixed issues


TRY CHANGING THE INPUT

Proton MS-42 LCD... | Answered on Dec 02, 2018 | 31 views


The LVDS cable is loose at the T_CON side. Simple fix. Take the back of of your set. It is the cable on the top middle that has a whole bunch of little twisted wires. With the set off take out the connector and the plug it back in tight. Turn on set and you should be back to normal.

Proton MS-42 LCD... | Answered on Jan 16, 2012 | 24 views


Yes, push the menu button on the remote and scroll through the menu items until you find the color adjustments. Joe

Proton MS-42 LCD... | Answered on Mar 10, 2010 | 142 views


What is wrong with it.

Proton Televison... | Answered on Aug 02, 2018 | 336 views


The TCON board or the LCD panel is faulty. You have to change the tcon board to confirm the fault
If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Proton Televison... | Answered on Nov 24, 2016 | 26 views


No. There no seperate fuse for backlighting.

Proton Televison... | Answered on Jul 06, 2016 | 31 views


Normally all the backlight inverters have fuse. It would be an SMd type.
Of you wish to get some more details check the link below
http://electro-medical.blogspot.com/

Proton Televison... | Answered on Jul 06, 2016 | 37 views


Back-light inverter board will have a fuse. Refer its circuit diagram to locate it. If it should blow up, there will be sufficient reason. Some short circuited components/s. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Circuit diagrams of many popular brand TVs and other devices are given.

Proton Televison... | Answered on Jul 06, 2016 | 36 views


Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Proton Televison... | Answered on Oct 14, 2015 | 54 views


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the relative post easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

Proton Televison... | Answered on Apr 28, 2015 | 41 views


This is simple: set in the closed caption menu (some cable boxes also have it) called TEXT. Look in the menu and turn it off first in the set and also in the box used if used for signal.

Odd feature and never really took off--designed so some channels like PBS etc could broadcast text.

Proton Televison... | Answered on Apr 03, 2012 | 68 views


Hi,

Please let me know the model no. of your unit. Also, does the symptoms is the same to all inputs?

Jdvillanueva

Proton Televison... | Answered on Sep 14, 2011 | 39 views


Just purchased a universal remote from jb hi fi

Proton Televison... | Answered on Jan 28, 2009 | 57 views


Maximums dvr super password

Televison &... | Answered 7 hours ago | 1,634 views


Hi,

Please check if printer is powered on. Or check the USB cable to computer/server is not loose. Reconnect it and see. If that is a network printer, serach it again with its name or IP address and add again.

Televison &... | Answered 9 hours ago | 20 views


Maybe a simple A-B switch, where A would be antenna and B would be satellite or vice versa if I understood your question correctly that is.

Televison &... | Answered 10 hours ago | 14 views


if using box check input or source if ok try cable and channel search then use 3 or 4

Televison &... | Answered 14 hours ago | 18 views


check input or source if ok check audio settings see if speakers on

Televison &... | Answered 16 hours ago | 16 views

Not finding what you are looking for?
Proton MS-42 LCD TV Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Proton Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Proton Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...