20 Most Recent Proton MS-42 LCD TV - Page 9 Questions & Answers


Watch the "How to setup your Android TV box T95M 4K" on Youtube. Or you can read "Quick Start guide to easy android TV box setup" https://androidpcreview.com/easy-android-tv-box-setup/

Televison &... | Answered on Oct 06, 2019


Two possible causes.
1. No signal input to the tuner.
2. Tuner fault.
Contact any service tech: to make it sure.
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Televison &... | Answered on Oct 06, 2019


Sounds like main digital board fault. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Televison &... | Answered on Oct 06, 2019


Go into 'menu' then 'controls' then 'allow ads' turn to 'off'
You may have to search awhile, they tend to bury it deep into the menus on some of those models. Also should be a 'allow popups' setting that needs to be turned to 'off' too, as some providers piggyback "popups" with their programming, stinks I know.

Televison &... | Answered on Oct 06, 2019


Have a look at the manual; http://files.remotecentral.com/view/6874-18404-1/one_for_all_urc-3940_slimline_4.html

Televison &... | Answered on Oct 06, 2019


Unfortunately it sounds as if you may be experiencing failure on the picture board, I'd consider taking it to a television repair shop.

Televison &... | Answered on Oct 06, 2019


The could would be found in a compatible remote control.

Televison &... | Answered on Oct 06, 2019


Probably the power supply is failing

Televison &... | Answered on Oct 06, 2019


Do you mean the Dynex ZRC-102 remote control? This remote was included with the Dynex DX-LCD19-09 and a few other models and is not apparently a universal remote control. The guide to the remote is usually included in the manual for the electronic device that the remote came with. The best source for the manual is ManualsLib, https://www.manualslib.com/manual/41507/Dynex-Dx-Lcd19-09.html#manual . Pages 5-6 describe using the remote: https://www.manualslib.com/manual/41507/Dynex-Dx-Lcd19-09.html?page=5#manual . Unfortunately, the manuals here, https://www.dynexproducts.com/pdp/DX-LCD19-09/8632848 , are not readable by my Windows computer. I don't have a Hex or Octet reader installed.

I hope this helps.

Cindy Wells

Televison &... | Answered on Oct 05, 2019


go into set up and reset to factory settings

Televison &... | Answered on Oct 05, 2019


Hi Brian Vicklun, indicate model and type of the sound bar you are commenting on, to find the best possible solution
I wait your answer
Regards Franco Dosil

Hola Brian Vicklun, indica modelo y tipo de la barra de sonido de la que estas comentando, para poder encontrar la mejor soluci?n posible
Espero tu respuesta
Saludos Franco Dosil

Televison &... | Answered on Oct 04, 2019


Make and model of TV will help you get an answer.

Televison &... | Answered on Oct 04, 2019


Maybe where they sell Sinotec TV's

Televison &... | Answered on Oct 04, 2019


I like Kodi a lot. Here is a very cool and working guide on how to install it on Firestick - https://www.firestickhow.com/kodi-firestick.html I am sure that you will find it helpful and interesting to you, good luck!

Televison &... | Answered on Oct 04, 2019


Hello! I think you should use some other apps for streaming. for example, have a look at the guide from https://www.firestickhow.com/best-firestick-apps.html for some good examples. I think you will like them a lot, and they will work well. Good luck with it!

Televison &... | Answered on Oct 04, 2019


My Panasonic cn hw 880d lock
Plz send me pasword
9_18_2017_7_08_48_am.jpg

Televison &... | Answered on Oct 04, 2019


kkmoon 8 ch DVR with 1TB WHEN I POWER IT ON THE START UP SCREEN (KKMOON) COME UP ON THE SCREEN AND THEN WHEN IT GO'S OFF NOTHING. RED POWER LIGHT IS ON DVR AND IN A FEW MINS BLUE RECORD LIGHT COMES ON BUT NOTHING ON THE SCREEN. ALL CAMRA'S HAVE THE MOTION LIGHTS ARE ON SO THEY ARE GETTING POWER AND WHEN THE dvr COMES ON IT BEEPS FOR THE CAMRA'S.

Televison &... | Answered on Oct 04, 2019

Not finding what you are looking for?
Proton MS-42 LCD TV Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Proton Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Proton Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Proton Televison & Video

  • Proton Televison & Video

Most Popular Question

4 year old hdtv picture no longer coming

  • Televison & Video
Loading...