20 Most Recent Canon PowerShot G11 Digital Camera - Page 6 Questions & Answers


Just go to the Canon web site for manual download.

Canon PowerShot... | Answered on Oct 22, 2016


hi, go to the settings tab, you will find the language settings , this will surely work

Canon PowerShot... | Answered on Oct 03, 2016


This is an OLD camera that uses CF cards - the earliest type of card storage. I have provided a link to the manual for the camera - it is considered as Powershot S20 based on your PC1002 number. On page 21 of the manual (page 24 of the pdf) there is a table listing the compatible cards. Another Canon link (provided) states you can use CF Type 1 cards.

https://support.usa.canon.com/kb/index?page=content&id=FAQ100296


http://www.wedophones.com/Manuals/CamerasAndCamcorders/Canon%20USA%20Canon%20PowerShot%20S20%2032MP%20Digital%20Camera%20w%20Manual.pdf

Canon PowerShot... | Answered on Aug 30, 2016


Can you access the images on your computer ? If you can, then the fault lies in the camera. If you cannot, then the card may have become corrupted and you will have to rely on your backup copies.

Canon PowerShot... | Answered on Aug 03, 2016


Give the camera some time. Don't remove the battery till the reset is done. I hope your battery was charged before you started the reset.
If the battery runs out of power, you must charge it comlpete, before putting it in again. I hope the reset went well. If not only try a reset with a fully charged battery.

Canon PowerShot... | Answered on May 27, 2016


The camera's internal date/time "backup" battery is supposed to maintain the date/time for about 3 weeks with the camera turned off. If the camera is not used for a longer period, the date/time will need to be reset. If you are having to reset sooner than that, it is likely that the internal battery (not user replacable on most models) has failed.

Canon PowerShot... | Answered on Mar 15, 2016


Replace lens

Canon PowerShot... | Answered on Feb 18, 2016


hi,
it could be a software problem. if the camera doesn't get the battery's information this will occur the center terminal of the battery must be clean, similarly the contact inside the camera.
if it works for a little while, try to reset to default manner.

Canon PowerShot... | Answered on Feb 10, 2016


hi,
it is for just a safety, no other cameras have this, when the b/lid open it will disconnect the battery power.

Canon PowerShot... | Answered on Feb 10, 2016


An odometer usually indicates a distance traveled. This may be showing if you've got GPS enabled.

Canon PowerShot... | Answered on Feb 06, 2016


I'm assuming that the camera has worked properly in the past and that this is a new issue. You've replaced the batteries with fully charged ones and they are the correct, recommended batteries. I ask because some prefer Alkaline, some Lithium, some rechargeable, etc. Also ensure that the individual battery output power as listed on the battery, is in line with your camera's requirements. Your owner's manual will provide this information.
If everything is correct and you still have same issue, it could be that the camera's internal computer has gone bad. Contact customer service and even if you no longer have a valid warranty, they can still refer you to one of their authorized service centers.

Canon PowerShot... | Answered on Dec 14, 2015


It works just the same as you view your photos, only the video clip will show player buttons at the bottom. Use the left/ right and select buttons of the camera to play the video clips.

Canon PowerShot... | Answered on Dec 02, 2015


Is it powering on? Try to change battery.

Canon PowerShot... | Answered on Nov 06, 2015


Sounds like you ISO setting (the 'film' speed) is set WAY too high. The brightness outdoors is causing the camera to not be able to expose correctly within the parameters of lens aperture and shutter speed. Try setting the ISO at 200.

Canon PowerShot... | Answered on Oct 04, 2015


The time limit is set because the image sensor in the camera heats up. You need to give it some time to cool between shots. The record time is set so permanent damage will not happen to the image sensor. Sorry. That time cannot be changed.

Canon PowerShot... | Answered on Sep 30, 2015


If the camera is older than 4 years old you can not use a large memory card in it. Try using a 2 gig card. That is the only fix that does not need a professional.

Canon PowerShot... | Answered on Sep 15, 2015

Not finding what you are looking for?
Canon PowerShot G11 Digital Camera Logo

101 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2260 Answers

Doberman

Level 2 Expert

261 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PowerShot Canon

  • PowerShot Canon

Most Popular Question

remove date stamp from uploaded photos

  • Cameras
Loading...