20 Most Recent HP PHOTOSMART PLUS B209A All-In-One Printer - Page 5 Questions & Answers

Hi,

If your router does not has WPS button, there is another way to Enable it from Router configuration under wireless settings
If you enable the WPS option from Router, you will have to press the WPS option from printer for automatic setup of printer on wireless network.
If you are not able to locate it then the WPS on your printer is of no use ( to connect to router )
Instead, I believe you have wireless router and you want to setup the printer wireless on network.

This is touchsmart printer and it has a setup button
Press SETUP option
Press WIRELESS option
Check for Wireless Setup Wizard
If it has Wireless setup wizard, select it and continue to search for wireless router and enter your network key if your router is secured with a key.
Run the software disk on pc and choose wireless connection and continue with the rest of the installation screen to complete.

If this option is not available, you will have to setup the printer thru usb cable and make it wireless

Run the disk on your pc
Choose Network Wireless connection
It will prompt you to connect thru USB
follow the instructions and it will ask you to disconnect
Continue with the remaining instructions.

ios devices use airprint. There are currentlt only about 10 compatable printers from what I have been told. The only way you will get it to work is through a jailbreak app. Sorry.

if it is cover under warranty call up HP
1-800-474-6836 its toll free

Hello and Welcome!

The error 0xc19a0022 is mostly occurred in HP printers
To solve the error code 0xc19a0022, Follow the given steps

• Reset the printer without turning off the printer, disconnect the USB cable from the rear of the printer
• Remove the cartridges from the printer
• Wait for the 'Insert Cartridges' message to display on the control panel
• Disconnect the power from the back of the printer
• Now wait 60 seconds
• Now reconnect the power If the product does not automatically turn on, press the Power button
• Reinsert the cartridges, and then close any open doors on the printer.
• If you receive a prompt to print a calibration page.Print it
• Reconnect the USB cable to the port of the printer & then try printing again
  

Error will automatically remove.
But if u face still this error then printer service required. In that condition best option is to Contact HP Service Provider

I hope this solution helps you
Thank you for using FixYa

Hi! You can try the document provided in the link below to troubleshoot the issue.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01770033&cc=us&lc=en&dlc=en&product=3777182&tmp_track_link=ot_search#N46

You can follow the document in the link provided below to troubleshoot the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01770033&tmp_task=solveCategory&lc=en&dlc=en&cc=us&product=3777182#N46

Hi! You can follow the document provided in the link below to troubleshoot the issue "ink system failure"
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01458034&cc=us&lc=en&dlc=en&product=3777182&tmp_track_link=ot_search

hi there!

please try to shake the ink cartridges then reinstall them again, make sure you hear the clicking sound meaning the cartridges are locked in place. you can try and call 800-HP invent or 800-474-6836 for technical support aswell. here is the link for your printer, you can get drivers, manuals and troubleshooting steps here as well.

http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=3777182

yes it certainly can

Scan and save the file. Open that image and go to "File>Save As" and name it (filename).tiff. Go to "Start->Programs->Microsoft Office Tools->Microsoft Office Document Imaging". Go to "File->Open" and open your document. Go to "Tools->Send Text to Word."

When process is done Microsoft Word will start and your document will be present and able to be managed as you please.

Open Printer from Control Panel. Right click to your printer icon. Click "set as default printer" and "use printer online". Try to print a document.

Hope this help.

An '0x ...' Error Message Displays on the Front Panel When Printing HP Photosmart C5380 All-in-One Printer - HP Customer Care (United States - English).

If you need more help post back!
Thumbs and testimonial are welcome!

Make sure printer and wireless access point/router is own.
Right click on printer and select "Use online"

please visit the following link it will help you to setup your printer

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02282624&cc=us&lc=en&dlc=en&product=3777182&tmp_track_link=ot_search

You can download the HP printer drivers from their supportWEB site. Please click on this link and select your model printer to download:-http://welcome.hp.com/country/us/en/support.html

I had a similar problem initially and the fault was with the photographic paper. The lines were very regular, just over 1cm apart. Once I switched to HP Advanced paper it cured it.