Samsung HT-TZ215R Theater System - Answered Questions & Fixed issues
When i turn on my
Its the ic audio amp board.......disconect the board and u will see the power turns on.....i have the same problem .......cant be repaired the cost is to expensive....i have put 2 fan on the ic board it keeps the unit cold and can play it about 5 hours daily
6/6/2016 5:43:07 AM •
Samsung...
•
Answered
on Jun 06, 2016
•
793 views
Dvd does not load. surround
I had the same problem for months, then i tried this,1 take disc out,2 turn system to standby then off at mains for 30 seconds. back on,3 power up,4 wait until it says no disc,5 press enter
on remote. (There will be no on-screen response.) 6. Press 8, 4, 2, 6, 9 on the remote. (There will be no on-screen response.) 7. Press enter on the remote. Player will automatically shut off. 8. Turn player on. 9. Turn off. 10. Turn player on then off again. 11. Player is now region-free.
i did all that and my system started to read discs again
8/3/2011 10:51:34 AM •
Samsung...
•
Answered
on Aug 03, 2011
•
131 views
Where can i buy a new power board?
If you know what you want to attempt then here you go..... you may not probably find a similar one that can substitute the earlier. If you know th output voltages of the smps and the current required you can isolate the earlier smps and fix another with a substitute with a similar current and voltage config
10/17/2009 12:02:09 PM •
Samsung...
•
Answered
on Oct 17, 2009
•
135 views
Hi, I'm using the Samsung HT-E330K. It works but does not speak out. The power display is fine but no sound
If your Samsung HT-E330K home theater system is not producing any sound even though the power display seems to be working fine, there are several potential causes and troubleshooting steps you can try:
1. **Check Volume Levels:** Make sure the volume on the home theater system and the connected TV (if applicable) is turned up and not muted.
2. **Check Audio Source:** Verify that the correct audio source is selected on the home theater system. If you're using multiple input sources (DVD, TV, AUX, etc.), make sure the right input source is selected.
3. **Audio Cables:** Ensure that all audio cables are securely connected to both the home theater system and the audio source (TV, DVD player, etc.). Sometimes, loose or faulty cables can result in no sound.
4. **Speaker Connections:** Check that all speakers are properly connected to the home theater system and that the speaker wires are securely inserted into the appropriate terminals.
5. **Audio Settings:** Go through the audio settings on both the home theater system and the connected TV (if applicable). Ensure that the correct audio output settings are configured.
6. **Mute Function:** Double-check that the mute function on the remote control or the home theater system itself is not engaged.
7. **Speaker Balance:** Check the speaker balance settings to ensure that sound is not unintentionally directed to one side or speaker.
8. **Reset to Default Settings:** If you've made any changes to the settings recently, consider performing a factory reset to revert to the default settings.
9. **Firmware Update:** If there is a firmware update available for your home theater system, consider updating the firmware as it might resolve any software-related issues.
10. **Test with Different Source:** Test the home theater system with different audio sources to rule out issues with a particular device.
11. **Test Speakers:** If possible, disconnect each speaker one at a time and test the audio to identify if a particular speaker or speaker wire is causing the issue.
12. **Check Speaker Impedance:** Ensure that the speakers' impedance matches the specifications of the home theater system. Mismatched impedance can affect sound quality.
13. **Contact Support:** If you've tried these steps and still have no sound, consider contacting Samsung customer support or seeking assistance from a professional technician for further troubleshooting and repair.
Remember to refer to your device's user manual for specific instructions related to your model.
Not finding what you are looking for?