KLH HA9000 Theater System - Answered Questions & Fixed issues

Go to manufacturer web site for manual download.

It depends. It either a Digital Coax cable(looks like an RCA cable), or it an Optical cable. The two look nothing alike.

hi,
You have to check the laser pickup unit of you dvd player. In your dvd palyer the laser pickup unit is faulty. There are two lasers in DVD players laser unit. One for reading the DVD and the other for reading the CD. In your player the DVD laser is faulty. As it is one module you have to replace the laser pickup unit as a whole.
ok

It's not connected correctly to the amplifier or receiver - check you connections. Or, the volume control is bad in the system. Does the remote control volume work?

Ha9000 tray will not open

If you want to get true surround sound, you will need to have a digital interface (optical toslink or digital coax) If you are using analog cable (red and white) the best you can get would be stereo or prologic surround

1. See if the rear speakers were pressed disable thru
your controls (either remote or in board). Just
press enable, to let it function.
2. If thedefect is still there, check the wires going to
the rear speakers if this is disconnected,
especially for plug on type. Open the plugon
connector and see the soldered wire at the
terminal. This could be disconnected. Have re-
soldered, and replace the plugon connector .
3. Then, power it up, and see if it works.

I just found your question answering another.

Windsor-10-12-Subwoofer-Manual.pdf

KLH Audio https://klhaudio.com > uploads > 2020/12 > Wi... PDF You can experiment with different configurations, or even add multiple subwoofers to your system (see diagram). 1. 3. 2. CONNECTING YOUR. SUBWOOFER. Ensure that ... 4 pages ..

Question edited for clarity. The website Scribd says it has it, or contact KLH using the details in the manual. https://www.google.com/search?q=klh+asw10-100c+wiring+diagram ..

Check here... https://www.justanswer.com/electronics/4j1p9-klh-r5100-receiver-power-lite-shows-red-standby.html BHAGYASHREE BHUSARE I believe is a Ai Bot.

Below is the manual link, this site does not allow pdf upload I would have done that for you. https://www.manualslib.com/manual/1239446/Klh-Fifty-Four.html?page=2

Any you like. They are not a good speaker. Any Amp with 8 ohm output and maximum of 50 watts RMS or 100 watts peak power. https://www.google.com/search?q=KLH+C130b+speakers My speakers https://www.google.com/search?q=wharfedale+linton ..

Hi Mailk. Goto this link and see if it helps you out. https://www.google.com/search?q=How+to+connect+tv+to+the+kLH+receiverr&rlz=1C1AVFC_enGB797GB798&oq=How+to+connect+tv+to+the+kLH+receiverr&aqs=chrome..69i57.13531j0j9&sourceid=chrome&ie=UTF-8

disconnect offending unit. then play see if same response occurs on the alleged normal unit using the offending cable interchange cables see if you get same result. Means it's bench repair ,internal electronics require specialist equipment to locate the offending item.

buy ????? ???? 19 ???? ? at https://ar.fifacoin.com, enjoy up to 10% off

You could check it by having the unit switched on a touching each of the pins of the device with an insulated tool. Making certain you don't short any of the pins together. You should hear a buzz on each channel. If you get nothing on the right then it could well have gone. However that is a lot of messing about, as the device can be purchased for around £12, it could be easier just to replace it and see if that cures it. After all it is the device that does most of the work, so the chances are it's gone!

If you can post a picture of the fuse it might help in tracking one down. However I should point out that fuses rarely blow on their own. And one blown is a sign of a serious overload, probably in the main amp or power supply section.

This is what is called a 'passive radiator'. It helps the bass response of the system. It is an adaptation of a bass reflex speaker enclosure. Try this link at wiki: Passive radiator speaker

That is sometimes called a "radiator". It's a speaker cone that moves opposite the main woofer and produces sound waves out of sync with the powered woofer. Very sophisticated piece of audio engineering intended to enhance bass response.

It could be an internal short in the amplifier board. What is the model number?