Samsung HT-Q20 Theater System - Answered Questions & Fixed issues

Hi, 1. Try cleaning the drive laser lens with a CD lens cleaner. 2. You need to check servo parts, spindle motor and pick up flat cable. 3. Clean laser lens manually. Success!

1. RESET While "NO DISC" message appears on the display of main unit, hold the main unit's STOP button for longer than 5 seconds. "INITIALIZE" appears on the display and all settings will return to the default values. Using the RESET function will erase all stored settings. 2. Firmware update Upgrade File ver 1.3, All OS (ENGLISH) 18 Sep, 2007 Upgrade guide ver -, All OS (ENGLISH) 21 May, 2007 HT Q20

While "NO DISC" message appears on the display of main unit, hold the main unit's STOP button for longer than 5 seconds. "INITIALIZE" appears on the display and all settings will return to the default values. Using the RESET function will erase all stored settings.

Upgrade File ver 1.3, All OS (ENGLISH) 18 Sep, 2007 Upgrade guide ver -, All OS (ENGLISH) 21 May, 2007 HT Q20

VCD - .MPG / .MPEG / .DAT (VCD1.1 & VCD2.0) WMV - .WMV (V1, V2, V3 & V7) DivX - .AVI / .ASF (DivX3.11 ~ DivX5.1 & Xvid) See User Manual ;)

While "NO DISC" message appears on the display of main unit, hold the main unit's STOP button for longer than 5 seconds. "INITIALIZE" appears on the display and all settings will return to the default values. Using the RESET function will erase all stored settings.

No.

While "NO DISC" message appears on the display of main unit, hold the main unit's STOP button for longer than 5 seconds. "INITIALIZE" appears on the display and all settings will return to the default values. Using the RESET function will erase all stored settings.

Contact any service technician to seek support. http://electronicshelponline.blogspot.com/

Should be FAT32 but some systems need ti to be EXFAT

It sounds like you've proven the first center speaker or its cable is dead. What's the mystery? Start the web quest for a replacement 3-ohm speaker with compatible connectors on it. I'd look on eBay.

http://www.ebay.com/itm/Samsung-Center-Bar-Speaker-PS-CC550-HT-C550-New-FREE-PRIORITY-SHIPPING-/280739606700?pt=Speakers_Subwoofers&hash=item415d6270ac

Hi there, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_4f5t

If this problem occurs only at this dvd it's a disk problem. If it occurs on various disks try using a cd/dvd cleaner set, a wet one is better. Follow the instructions on the set. The main idea is to put one drip of the included liquid at the set (usually isopropyl alchohol) at a specific place (like small brush) on the disk surface and play this disk. That way the "brush" will clean up the laser lens and after that the cd/dvd player will be able to read the disks. BE CAREFULL not to put too much liquid on the "brush".

In case of a problem or clarification, don't hesitate to post me a reply.
If you are satisfied, rate my solution with the "thumbs".

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

On the rear of your TV connect, with a phono/RCA cable to the Audio R + L sockets, connect the other ends to your Yamaha using the TV in sockets. See photos attached Hope that helps. HDMI is for video unless the extra pins are added for audio.

See service manual. There are no fuse in it. Service Manual: SA-WX900 ' PDF ' Loudspeaker ' Electronics (scribd.com)

See page no 65 troubleshooting in user manual YPU4J-CANADA-ENGLISH0.0_0610.indd (samsung.com)

See following link, it may resolve your issue My MP3 Player Is Locked Up (Frozen). ' Samsung Africa

Normally makers don't play ball between each other. Yes if it was a Samsung Television and a Samsung Receiver A/V System. Or if you have something like a Cable Box or Satellite System that is made to interact with other makes. Or if it is a Universal Remote. I think you were just lucky that it happened to use the same frequency. Look in the manual for a scan command. https://www.google.com/search?q=Connect+Samsung+OLED+S90+remote+to+Yamaha+RX-V361+via+optical ..

Check battery. It may require replacement.

Check the battery. It may require replacement.