Samsung HT-P10 Theater System - Answered Questions & Fixed issues

..I would assume that you have carefully cleaned the lense and inspected the flexible ribbon cable..try replacing the spindle motor..in our case they are not expensive..good luck Elben

If this is confirmed then the OPTICAL HEAD must be replaced with the same type. Before this is done you can clean the lens as a last attempt.
Use all precaution when replacing the head, need to remove the static shorting in the new head before replacing. Take help.

Generally speaking, an amp protects itself from heat, shorts and overloads by refusing to turn on or stay on.

Overloads can be from excessive periods of high output and shorts would be wiring issues or a speaker blowing up.

You should be able to feel if it's hot. WHY is it overheating? Make sure it has sufficient ventilation on all sides and that vent holes are not blocked by dust balls. Ensure the fan (if equipped) is running as designed (some only operate on demand). Clean dust and debris from it.

If the amp comes back on after cooling, you're lucky. They only have so many self-protection cycles in their lives so continuously resetting or cycling their power without addressing the cause can do more harm than good.

If it protects immediately on a cool power up you should disconnect the speaker connections and try it 'naked'. If it comes up then diagnose which lead(s) are shorted. If it does not come up the problem is internal and should be left to an experienced hands-on tech.

Check for loose speaker connections as a root cause for intermittent shutdown.

samsung ht-p10 subwoofer not volume

The amplifier has a bad channel or is bad in general, and will need replacing. In some cases, it's a separate board and can be replaced itself, but in others, everything is on one board(except the power supply unit) and warrants just having he unit replaced.

What connection are you using to connect the theater system to the TV.

Direct video cable or component video Pr, Pb and Y inputs?
Refer page 13 of the manual. (scroll down to enter verification code provided for download)

You will also have to make sure the TV setup is selected for the correct connection both on the Theater system and the TV. Refer page 33 of the manual.
It might help me to provide a clearer idea if you also mention the make and model no. of your TV. Did this work before?

Please rate the solution if you found it helpful or post a comment if you want further assistance.

Hi.. my home theater system HT-P10.... is not working.... Any of its function do not respond after it being kept on...! Any of its function are not working.... the dvd player doest open up.. nor sound comes out of auxiliary, radio or any other function... and the 5.1 display is never shown.. it shows 2 channels only..
and this had been the problem frm last 1year.. at the beginning of the year... it was working suddenly in between and at times it use to turn out inactive but from last 6-7 months it is totally inactive...!
I contacted samsung.co.in and the guys came down to my house telling that we dont hold any spare parts of system we cannot do anythin...a do they say we do not repair...!
So what to do to repair it.. can it be..? nd can i ever use its sond sytem only.. in any form.?

this is because you used original disk`s from different areas. Try this:
1. Open tray and remove any disks in tray.
2. Close tray.
1. Switch Off Player and Unplug from mains wait 30 seconds (this clears RAM)
2. Reconnect to mains
3. Turn on player with remote.
4. Press ENTER on remote.
5. Press 8, 4, 2, 6, 9. Using keys on remote.
6. Press ENTER on remote. (The player will power off.)
7. Switch on power from remote.
8. Player is now Region Free.

You could try cleaning the drive with a dvd cleaner disk and also a can of compressed air to blow into the drawer. It may just be dirty. Good luck! I hope this helps you.

On the rear of your TV connect, with a phono/RCA cable to the Audio R + L sockets, connect the other ends to your Yamaha using the TV in sockets. See photos attached Hope that helps. HDMI is for video unless the extra pins are added for audio.

See service manual. There are no fuse in it. Service Manual: SA-WX900 ' PDF ' Loudspeaker ' Electronics (scribd.com)

See page no 65 troubleshooting in user manual YPU4J-CANADA-ENGLISH0.0_0610.indd (samsung.com)

See following link, it may resolve your issue My MP3 Player Is Locked Up (Frozen). ' Samsung Africa

Normally makers don't play ball between each other. Yes if it was a Samsung Television and a Samsung Receiver A/V System. Or if you have something like a Cable Box or Satellite System that is made to interact with other makes. Or if it is a Universal Remote. I think you were just lucky that it happened to use the same frequency. Look in the manual for a scan command. https://www.google.com/search?q=Connect+Samsung+OLED+S90+remote+to+Yamaha+RX-V361+via+optical ..

Check battery. It may require replacement.

Check the battery. It may require replacement.

You would have to define 'it'. In a question talking about two items, you need to clearly state 'make model (what it is)' for both items. The main item should be the first 3 words in the question. ..

If your Samsung HT-E330K home theater system is not producing any sound even though the power display seems to be working fine, there are several potential causes and troubleshooting steps you can try: 1. **Check Volume Levels:** Make sure the volume on the home theater system and the connected TV (if applicable) is turned up and not muted. 2. **Check Audio Source:** Verify that the correct audio source is selected on the home theater system. If you're using multiple input sources (DVD, TV, AUX, etc.), make sure the right input source is selected. 3. **Audio Cables:** Ensure that all audio cables are securely connected to both the home theater system and the audio source (TV, DVD player, etc.). Sometimes, loose or faulty cables can result in no sound. 4. **Speaker Connections:** Check that all speakers are properly connected to the home theater system and that the speaker wires are securely inserted into the appropriate terminals. 5. **Audio Settings:** Go through the audio settings on both the home theater system and the connected TV (if applicable). Ensure that the correct audio output settings are configured. 6. **Mute Function:** Double-check that the mute function on the remote control or the home theater system itself is not engaged. 7. **Speaker Balance:** Check the speaker balance settings to ensure that sound is not unintentionally directed to one side or speaker. 8. **Reset to Default Settings:** If you've made any changes to the settings recently, consider performing a factory reset to revert to the default settings. 9. **Firmware Update:** If there is a firmware update available for your home theater system, consider updating the firmware as it might resolve any software-related issues. 10. **Test with Different Source:** Test the home theater system with different audio sources to rule out issues with a particular device. 11. **Test Speakers:** If possible, disconnect each speaker one at a time and test the audio to identify if a particular speaker or speaker wire is causing the issue. 12. **Check Speaker Impedance:** Ensure that the speakers' impedance matches the specifications of the home theater system. Mismatched impedance can affect sound quality. 13. **Contact Support:** If you've tried these steps and still have no sound, consider contacting Samsung customer support or seeking assistance from a professional technician for further troubleshooting and repair. Remember to refer to your device's user manual for specific instructions related to your model.

Service Manual. Page 5.2

SAMSUNG HT-E330K Service Manual download, schematics ...

elektrotanya.com > download

Translate this page Download SAMSUNG HT-E330K service manual & repair info for electronics experts.

Home Entertainment System HT-E330K ' Samsung Support ...

www.samsung.com > ... > Standard home cinema system

Mar 18, 2020 - Home Entertainment System HT-E330K. Solutions & Tips, Download Manual, Contact Us. Samsung Support Singapore. Missing: schematic ‎' Must include: schematic