Power Acoustik PTID-7001N Car DVD Player - Page 7 - Answered Questions & Fixed issues

# of Channels 4 RMS Power (Watts Per Channel) 50 x 4 @ 4 ohms

All about the codes and 3 ways to get it. https://www.fixya.com/support/r29874205-need_vehicle_radio_code ..

first check all the power connections verify every thing is hooked up correctly. check the fuses. and the amp has to have a separate wire called remote going to the back of the head unit. the head unit sends a signal to the amp to tell it to turn on when the head unit is powered on.

Depends on the make and model of your radio.

Question edited for clarity. If you can spell it, you can Google it :>D https://www.google.com/search?q=panasonic+omnivision+change+to+aux+mode

I have a remote from a Panasonic Omnivision TV vcr ...

JustAnswer https://www.justanswer.com > TV Problems Jan 27, 2010 - If you get TV power and volume to work in the AUX mode you could then do a Volume Lock for the AUX mode so that pressing Volume will be locked ... 1 answer · Top answer: Greetings, I'm assuming the TV will operate manually with the buttons on the front of the ... ....

if there is a Reset button at the front face of the Radio, or else full restart can only be done by removing the battery terminal. but make sure you still keeping the Code, may ask for Code if it is Code protected.

There are 3 ways to get a a radio code. I wrote the answer so many times, I wrote a Fixya Tip on it. https://www.fixya.com/support/r29874205-need_vehicle_radio_code ..

I can't find anything on software or firmware downloads, but you could try resetting it. Check all of the settings categories first.https://www.google.com/search?q=panasonic+cn-273w+resetIt appears the model is only sold on the Japanese Market so there is not much on it looking from where I am in Canada.https://www.google.com/search?q=panasonic+cn-273w+manual..

Turn the radio on. Hold down the volume knob for 3 seconds. The display will come up Volume Setting Rotate the volume know clockwise until the display switches to time setting. Push the volume knob. Rotate the volume knob to select the hour Push the knob Rotate the volume knob to select the minute. Push the knob. Done.

Hi I have pioneer carozerria hzr990 and can't use usb

The vehicle has not been identified. The error message seems to appear on cd players when the tray refuses to eject. Lubrication of the ejection mechanism might help. Too little information has been provided to identify the specific model for any sort of disassembly. It is otherwise likely the player will have to be replaced.

It is saying WAIT 1 HR because the wrong code is being entered.

Leave it SWITCHED ON for an hour and it will reset itself

Make sure you have the correct code 

read below if you do not have the code
-----------------------------------------------------------------------------------------------

First make sure that the code has not been noted somewhere within the car (underneath the ash tray, glove box , rear of sun visor etc)
 
 
To see if your code is available here  for free then the radio will have to be removed from the dashboard (and if you are lucky, someone may have written the code on the casing ) .
 
If not then POST A BRAND  NEW  QUESTION
 
quoting the radio MAKE+MODEL plus ALL the LETTERS+NUMBERS on ANY LABELS ,BARCODES or STAMPED IN THE METAL CASING
 
Also quote the MAKE of CAR
 
note: Unfortunately not all radios can be decoded using the Serial Number
 
Otherwise try your Main Dealer ...........or take it into a Decode Service who will plug in a laptop to read/recode the memory chip (EEPROM). This takes a few minutes and shouldn`t be too expensive

BP937828363212

Try these website. It may help RADIO CODE UK ' Free Grundig WKC 5201 RDS radio code entry instructions and guides (radio-code.co.uk) GRUNDIG WKC 5201 RDS INFOMAT GR1001 / GR1001 Radio Code ' Online Service (carstereocode.com)

Question ordered for a lot more clarity. Yes, if you can remove the board, you can solder in a new socket. https://www.google.com/search?q=replace+usb+port+in+motherboard ..

here is a link ti similar model https://www.manualslib.com/manual/746679/Jensen-Xa2250.html#manual

According to a post on the Apple Community forum, some iPods may not connect to the Kenwood KDC-X993 car stereo via USB after upgrading to iOS 41. Unfortunately, there is no official update available from Kenwood to fix this issue. However, one user suggested trying DFU mode, which may allow you to step back down to a prior revision of iOS Ipod Touch will not connect to my Kenwood... - Apple Community

I found a wiring diagram for the 2005 Hyundai Elantra that might be helpful . According to the diagram, the color codes for the factory wiring harness are as follows: Wire Color Function Orange/Black 12V Constant Yellow 12V Accessory Black Ground Blue/Black Power Antenna Green/Orange Illumination Brown/White Left Front Speaker (+) Black/White Left Front Speaker (-) Brown/Yellow Right Front Speaker (+) Black/Yellow Right Front Speaker (-) Brown/Red Left Rear Speaker (+) Black/Red Left Rear Speaker (-) Brown/White Right Rear Speaker (+) Black/White Right Rear Speaker (-) If you don't have a plug on your factory wiring harness, you can hardwire it by connecting each wire to its corresponding wire on your new stereo. You can use crimp caps or soldering to make the connections . If you're not comfortable with hardwiring, you may want to consider purchasing an aftermarket wiring harness that clips onto the factory harness you removed off the rear of your factory radio during its removal. This will make it easier to connect your new stereo to your car's electrical system .Hyundai Radio Wiring Color Codes - Radio Codes Calculator

Not so. Becker radios are German products that are put into Mercedes (and other German imports). There are techs who advertise online and provide codes for a nominal fee. Worst case, you can contact BeckerUSA for a code for a bit higher-than-nominal fee.
Pontiac. Nice try.

See this manual. It may help. FS (For Sale) SOLD!! 1986 Delco Bose Radio / Amplifier Service Manuals - CorvetteForum - Chevrolet Corvette Forum Discussion