Power Acoustik PTID-7001N Car DVD Player - Answered Questions & Fixed issues


Search google for a schematic should be able to find one. I repair amps. Marks Car Audio & Amp repair
e-mail skinnman33 @gmail.com I can be reached at 727-266-6398 Let me know

Power Acoustik... | Answered on Apr 01, 2019 | 38 views


It depends on how many channels are on the Amp. If it's a 2 channel you can bridge it using the positive on one channel and use the negative on the other channel. The Amp will give the sub more power bridging the sub.

Power Acoustik... | Answered on Mar 10, 2019 | 121 views


Long press the button

Power Acoustik... | Answered on Feb 06, 2019 | 97 views


Power to battery. Ground to something in trunk. Remote to blue lead on radio. Rca to line or sub out on radio.

Power Acoustik... | Answered on Sep 14, 2017 | 105 views


Fixya does not sell replacement volume (control) knobs.

Power Acoustik... | Answered on Sep 12, 2017 | 76 views


Reading the ident number off the FET is the easiest way.

Power Acoustik... | Answered on Jun 18, 2017 | 72 views


The refurb may not have been complete

Power Acoustik... | Answered on Mar 24, 2017 | 46 views


Power Acoustic is a possible source.

Power Acoustik... | Answered on Nov 20, 2016 | 208 views


yes, but you will need a significant 12 volt power inverter to support 500 watts

Power Acoustik... | Answered on Sep 10, 2016 | 168 views


Assuming you have all the connections correct and there is the appropriate signal (12v, ground, etc then tour unit is defective.

Power Acoustik... | Answered on Sep 06, 2016 | 330 views


Google your model number or go to www.poweracoustik.com and download the owners manual. You can bridge it to 2 channels 4 ohm stable only!

Power Acoustik... | Answered on Sep 02, 2016 | 239 views


you can do it but that bass cannon will not power the sub well at all. They put out maybe 40 watts RMS. best to find a cheep receiver and do it that way a lot less hassle. better sound. If you dont understand give me a shout.

Power Acoustik... | Answered on Mar 08, 2016 | 141 views


If it is burning up resistors you have a power problem. honestly if it does this i would not invest the money into it i woud get another amp by the time it is repaired it will cost almost as much as a new amp. but if you still wanna do it id look threw china manufactures like Alibaba.

Power Acoustik... | Answered on Mar 03, 2016 | 86 views


set gain low. the other is your filtering frequency as at what hertz you want to listen at switch threw them for your best sound.

Power Acoustik... | Answered on Mar 03, 2016 | 140 views


the shown photo is a bit confusing too me , clearly this is an automotive speaker , but in the photo there is clearly a home power cord shown , is this power cord connected anywhere on this speaker ? as if it is , id be afraid that amp has received home power and not car power , as the two are not the same and have tremendous differences and would be quite damaging to this amp possibly unrepairable damage

Power Acoustik... | Answered on Feb 24, 2016 | 163 views

Not finding what you are looking for?
Power Acoustik PTID-7001N Car DVD Player Logo

Popular Tags

5 questions posted

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Audio & Video Experts

Dalynn Turner

Level 2 Expert

346 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

The Knight
The Knight

Level 3 Expert

76046 Answers

Are you a Power Acoustik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...