20 Most Recent Power Acoustik PTID-8940NRBT Car Video Player - Page 7 Questions & Answers

0helpful
1answer

Screen flips and the turns off

Assassin's Creed IIICapturing a sense a serious amounts of place has always been central towards appeal of each Assassin's Creed. If the dusty streets of Masayaf, the c**** veined archipelago of Venice or even the sun baked Constantinople, everyone of Ubisoft's chosen settings has been designed with such a level of authenticity and historical accuracy (albeit twisted because of their narrative purposes), which it's quite normal you just read stories of tourists having the capacity to make their way around Rome simply from having memorised the map in Brotherhood.It's hardly surprising then that with Assassin's Creed III Ubisoft have absolutely nailed a recreation of 18th century revolutionary America. It's a sprawling land of open forest, bustling colonial cities and epic naval warfare, loaded with wildlife, frontiersmen and Redcoats. Many techniques from the lengthy reload animation of the period musket, towards the recognisable compacting crunch of jumping though waist high snow may be meticulously designed: not since Red Dead Redemption's Wild West comes with an American frontier been so fully realised and engrossing.The burgeoning wooden structures of Boston and New York play much like the brick tiled buildings of Europe, albeit after a little less verticality and wider streets. However it's from the forested areas that people understand why Ubisoft think worthy of another numbered entry in the series, rather than a subtitled sequel. The pine-valleyed frontier is usually a technical and visual marvel, and whilst there's a little too much conveniently angular geometry operating in the series' trademark free running gameplay, it's varied enough to weave a convincing illusion. The width, depth and breadth on the " new world " can be a grand ambitious statement of intent from Ubisoft - this really is their American epic.
11/15/2012 6:40:39 PM • Power Acoustik... • Answered on Nov 15, 2012
0answers
0helpful
1answer

My power acustik 1200 watt amp is on protection mode how do i fix it

Check that no speaker wires or some other wire come off, If they all look okay, There is a internal problem with the amp, It will have to be taken in for repair,
10/30/2012 7:04:06 PM • Power Acoustik... • Answered on Oct 30, 2012
0helpful
2answers

The navigation on my radio

Hello... sorry to hear you are having problems! First we need to determine if you have a factory aftermarket navigation system If it is factory, there is not very many options for you the consumer to do yourself. If you have an aftermarket radio (store bought) then find where the antenna is located. Most of the newer antennas are about 1 inch by 1 inch square. If it is on your dashboard, it needs to be routed to the exterior of the vehicle. Navigation is done by "line of sight" with the satellite. If it is blocked by metal under the dash or the under the roof of the vehicle then that would be your problem. If your antenna is outside the car, then you may have a break in the line which would require replacement of the antenna. All that I have spoke of is if you have an aftermarket system. Each aftermarket system is gender specific, meaning if you have a JVC headunit, then you will have to go to a shop that carrys or can get JVC parts. Maybe this helped! Good luck with your venture!

20 year car audio/video installer
Bay Manager
10/19/2012 3:05:08 PM • Power Acoustik... • Answered on Oct 19, 2012
0helpful
1answer

Amp not working

Make sure you have the amp grounded. I put one in last week and would not work till I grounded the amp to the car....Run a seperate wire to the car/truck.
7/22/2012 1:31:34 AM • Power Acoustik... • Answered on Jul 22, 2012
0helpful
1answer

D1-3000d

check the signal cable, there could be interference that causes a high peak that keeps the protection light on because of constant high output
6/11/2012 6:41:17 AM • Power Acoustik... • Answered on Jun 11, 2012
0helpful
1answer

The outputs of my 2300 power acoustic stopd workin

discus clearly.what's your problem ?
5/30/2012 5:51:19 AM • Power Acoustik... • Answered on May 30, 2012
0helpful
1answer

My screen comes on until it goes to flip up then

you need to get your ribbon cable replaced. It's a cable that goes from the face to the main unit. they go out a lot. My suggestion is the next radio you buy, make sure it has no moving parts. Try to find the part at pacparts.com. I’m happy to help further over the phone at https://www.6ya.com/expert/chris_7f7f91eb941fb23f
5/22/2012 3:42:09 PM • Power Acoustik... • Answered on May 22, 2012
0helpful
1answer

Power acoustic lt620-2

It's a straight forward swap, just make sure you line up the cathode leg (the one nearest the stripe) the right way before you solder.If the are any resistors around the capacitor it's worth changing them too, things don't normally blow on their own.The caps and resistors are easy enough to get hold of from maplin or RS.Good luck
4/22/2012 6:08:08 PM • Power Acoustik... • Answered on Apr 22, 2012
Not finding what you are looking for?
Power Acoustik PTID-8940NRBT Car Video Player Logo

Popular Tags

11 questions posted

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Audio & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Power Acoustik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Power Acoustik Car Audio & Video

  • Power Acoustik Car Audio & Video

Most Popular Question

power acoustik ptid 8970nrb radio will

  • Car Audio & Video
Loading...