20 Most Recent Jabra Bluetooth Headset - BT2070 - Page 2 Questions & Answers

Try 0000, that should be a default code. If not then It is possible to reset and test the headset. Make sure that the headset is powered off. Press and hold the answer/end button and the on/off button at the same time for 10 seconds. The headset will automatically turn off after approx. 10 seconds. The next time you power on, the headset will go into pairing mode as the first time you powered your new BT2070 on Hope this helps. Thanks

Hold the "Answer/End" button on your Jabra Bluetooth headset down until the LED light on the headset turns solid blue. The location of the button may vary based on which headset you have, but its appearance will be the same; it is the button that has an image of a telephone on it.


Click on the "Settings" icon from the main screen of your iPhone 4 .

Click on "General" in your iPhone's "Settings" menu.


Click on "Bluetooth" to access your iPhone's Bluetooth menu and then click the option to turn on your iPhone's Bluetooth connection. Once your iPhone's Bluetooth is turned on, it will search for available Bluetooth devices.


Select your Jabra headset by clicking on the icon that appears on your iPhone's screen.


Enter the passkey for your Jabra Bluetooth headset. The default passkey on Jabra headsets is "0000."


Click on "OK" on your iPhone 4 to complete the connection to your Jabra headset.

Tips & Warnings



The LED light on your headset must be solid blue to pair to your iPhone. A flashing light indicates your headset is not yet in pairing mode and your iPhone will not be able to connect to the headset.

Having your iPhone 4 Bluetooth turned on will drain your phone battery faster than normal.

Have you already tried to put your headset in pairing mode first? Anyway, in order to do it, start with it turned off. Then, press and hold the on/off button for some 5 seconds, until the indicator light is steadily lit (it will flash as it was being turned on, but don't release the button at that phase). Then, make your phone's bluetooth application search for new devices. After a little while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros).
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.
Hope you are able to sort your problems out.

And, please, let me know if I can assist you any further.

Regards, Carlos

The pairing passcode is 4 zeros "0000"

Have you already tried to put your headset in pairing mode first? Anyway, to do it, starting with it turned off, press and hold the on/off button for some 5 seconds, until the indicator light is steadily lit (it will flash as it was being turned on, but don't release the button at that phase). Then, make your phone's bluetooth application search for new devices. After a while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros);
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.
Hope you are able to sort your problems out.
Regards, Carlos

hello,
if you are looking for the manual of this jabra headset click on the link below to download the manual "http://www.ps2netdrivers.net/review/jabra.bt2070/#manual"
thank you for using Fixya

hello first i would like to know if your phone is paired with ur bt device if it is and it is asking for your pin code again most pin codes for manufactures are as follows 0000,9999,1111,or 1234.hope this is the answer you are looking for..now if your device is not connected you need to reconnect the device to your phone ,follow your cell manufactures procedures for connecting your bt device and make sure u set your bt device to discovery mode,then when it asks for the pin code enter one from above most are 0000 but the odd time one of the other codes is required...hope this helps

The password is fixed and cannot be changed. It is 0000 (four zero's).

i'm assuming youve paired it with the ps3, but have changed the input device in audio device settings? try that. and check this:

http://cnettv.cnet.com/use-any-bluetooth-headset-your-ps3/9742-1_53-50004665.html

hope it helps. ciao.

Have you already tried to put your headset in pairing mode first? Anyway, in order to do it, start with it turned off. Then, press and hold the on/off button for some 5 seconds, until the indicator light is steadily lit (it will flash as it was being turned on, but don't release the button at that phase). Then, make your phone's bluetooth application search for new devices. After a little while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros).
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.

Hope you are able to sort your problems out.

And, please, let me know if I can assist you any further.

Regards, Carlos

Have you already tried to put your headset in pairing mode first? Anyway, in order to do it, start with it turned off. Then, press and hold the on/off button for some 5 seconds, until the indicator light is steadily lit (it will flash as it was being turned on, but don't release the button at that phase). Then, make your phone's bluetooth application search for new devices. After a little while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros).
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.

Hope you are able to sort your problems out.

And, please, let me know if I can assist you any further.

Regards, Carlos

I dont owe one.

look in the manual

my phone will not detected the head set

Hi, Donald,
Have you already tried to put your headset in pairing mode first? Anyway, in order to do it, start with it turned off. Then, press and hold the on/off button for some 5 seconds, until the indicator light is steadily lit (it will flash as it was being turned on, but don't release the button at that phase). Then, make your phone's bluetooth application search for new devices. After a while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros).
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.
Hope you are able to sort your problems out.

And, please, let me know if I can assist you any further.
Regards, Carlos

Have you already tried to put your headset in pairing mode first? Anyway, to do it, starting with it turned off, press and hold the on/off button for some 5 seconds, until the indicator light is steadily lit (it will flash as it was being turned on, but don't release the button at that phase). Then, make your phone's bluetooth application search for new devices. After a while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros);
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.
Hope you are able to sort your problems out.
Regards, Carlos

If you are getting a connection failed message, I would suggest powering off the headset. Then remove the battery from your cellphone while it is powered on, leave it out for 10 seconds, put it back in and reboot the phone. Power the device back up and put it into pair mode if necessary, then re-search in your bluetooth menu and select the device.

Rylan

The code is 0000. Have a great day.

Try putting in 1111. It still will not engage. But after you do this it will reset. Then put the 0000 in and you will be connected.