20 Most Recent Canon FS200 Flash Media Camcorder - Page 9 Questions & Answers

http://www.ehow.com/how_6344609_connect-canon-camera-webcam.html

hi, your cam is analogic, so you need a A/D to usb cable and a decent processor cable here: HIGH QUALITY EASIERCAP USB 2 0 TV DVD VHS Video Audio AV CAPTURE Cable that's all (with the cam's cables and of course a software like the one that comes with the usb capture card) cheers, mich

The Canon XM2 is a European PAL camera so if you're in the U.S. this is going to cause issues for you. The XL2 would be my choice based on previous experience, though.

Here's a copy of the manual that includes those instructions: Canon VIXIA HF G10 VIXIA HF G10 Instruction Manual

You will have to take the camera apart and get to the back side of the connector. Most likely it is directly mounted to a circuit board. I am sure it is the board that is bad and not the connector itself. There should be a replacement number on the board itself.

It is a known problem that caused by the defective CCD sensor and must be replaced.

can you do a factory reset of camera?

You may download a copy of the manual at https://docs.sony.com/release/GVD1000E.PDF

I think so

SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

Go online and download the free version of Nero Burning Rom. This software will walk you through the process step by step.

Hello, Here is the website for this service manual. Free Canon Camcorder User Manuals ManualsOnline com

Buy a camera socket to USB cable. Whatever external socket is fitted to the camera can be mated with a USB plug. These are available on the net or PC store. You just plug the one to the other and play/record. Red.