20 Most Recent HP Compaq DC5800 Small Form Factor PC Desktop Questions & Answers

Hi! In this HP page, you will find the information regarding this device, that was identified as "Microsoft UAA Bus Driver for High Definition Audio", as well as links to download the drivers. https://support.hp.com/hr-en/document/c00765866#AbT1 Hope you may find this iformation helpful! Best regards, Miguel L. Martins

Open Google. and Type "Driver Identifier" in Search Box so driveridentifier website open and download mini software Install it and then find your driver

Hi Blessedgivenus. This seems to be a problem related to your memory DIMM modules. You may need to remove your DIMM modules, clean their contacts lightly with a pen eraser to remove any sign of oxidation, then clean them with paper tissue to remove any eraser debris and resat them back to your computer. If the problem persists, try installing the DIMM modules one by one, in order to try to identify which one is defective and replace it with a brand new one. Please, check the figure below for more info regarding this problem: This and other troubleshooting information regarding your machine can be found in this manual, that can be downloaded from the following link: http://h20565.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01363877 Hope you may find this information helpful! Regards, Miguel L. Martins

http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/troubleshootResults/?sp4ts.oid=3658082&spf_p.tpst=psiContentResults&spf_p.prp_psiContentResults=wsrp-navigationalState%3Daction%253Ddoclist%257Ccontentid%253DA.01.09&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken HP SUPPORT.THAT MAY HELP.

Yes, things will go faster if you un-check it, but searches will go slower.

This is due to the wrong incompatible CPU in the board. There s a possible fix by HP listed here, where you can apply some code via a USB stick, if you want to try it. how to fix 1801 Microcode Update Error in HP Compaq dc7800 Convertible...

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_bd9b6997fbc7fc515f4cf4626f5c8d01=wsrp-navigationalState%3DswEnvOID%253D1093%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.tpst=bd9b6997fbc7fc515f4cf4626f5c8d01&sp4ts.oid=3658094&ac.admitted=1410515291005.876444892.492883150#Software - Solutions

Could be a problem with the RAM. You can do a boot-up RAM test with a CD-ROM or USB stick using Memtest Memtest86 Advanced Memory Diagnostic Tool

According to the troubleshooting guide for this model, the red light flashing five times indicates a problem in the RAM (memory), before the video subsystem is ready. You may just need to open the case and make sure the memory sticks are fully locked in their slots. If you just added new memory, it might not match the required specs.

Blank screen and the power LED flashes Red five times, once every second, followed by a two second pause, and the computer beeps five times. (Beeps stop after fifth iteration but LEDs continue flashing.)

Cause Pre-video memory error.

Solution
1. Reseat DIMMs. Power on the system.

2. Replace DIMMs one at a time to isolate the faulty module.

3. Replace third-party memory with HP memory.
4. Replace the system board.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01363877/c01363877.pdf

You would need to look at the BIOS manufacturers site for the beep code and it's meaning. You can also pull all the hardware out, memory HDD, CD/DVD and boot if you no longer get the error, power down and add one component back and boot. Repeat until you get the beep code again and you will know what the problem part is.

If your computer came with a motherboard disc the sound drivers could be on it Click start control panel administrative tools computer management device manager scroll to sound video and game controllers you might see a yellow question exclamation mark? ! or a red X Right click to reinstall drivers. Click start control panel sounds and audio volume advanced speakers make sure you have selected the (appropriate speakers) also audio you will find 3 drop down lists make sure you have selected the correct speaker settings. Click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it If his does not fix the problem Click start control panel sounds and audio devices you can adjust the volume there also select speaker. volume you can change your settings there you can also tick in the box place icon in taskbar for any further volume control settings you will need to right click on the speaker volume icon system select adjust volume. Click start control panel sounds and audio volume advanced speakers select the appropriate speakers from the drop down list or navigate to the device manager scroll to system devices + to expand system speaker right click properties then select use this device (enable). The speaker plug/outlets is usually at the back of the computer or if its a laptop on the side. You will have to open up the computer to check the lead attached to the rear of the input plug make sure the connection is good with no dust as dust causes static electricity. Clean your computer of dust using a fine air blower from a compressor making VERY sure that there is no MOISTURE in the air line specifically around the sound card and the CPU central processing unit. Dust causes static to build up in a computer http://download.cnet.com/2000-20_4.html On the home page you should see a search tab just type in what you are looking for. Tick in either the all software or windows software box IE: motherboard name audio driver you might have to try a few times to get it right for windows 7 Click start right click on computer select properties then device manager scroll to sound and video game controllers if you see a yellow question/exclamation mark or a red X the driver will need to update drivers. Click start right click on computer select properties then device manager scroll to sound and video if you right click on sound and video then on high definition audio device select update driver software. Click start control panel hardware and sound manage audio devices right click on your speaker select configure speakers. Right click on the speaker icon in the bottom taskbar you will see an array of options select playback devices make sure it has a green tick and the correct speakers are selected be updated if you computer came with a motherboard disk the drivers could be on it although once speakers are connected widows 7 should automatically update the drivers. Click start control panel hardware and sound manage audio devices playback you might have to set a default go for via high definition audio then right click on speaker. You might have to configure them then select properties you will see tabs general level in this tab make sure your settings are loud enough also enhancements and advanced from the drop down list in the advanced tab select dvd quality or another then apply

Reboot the machine, press Ctrl+Del+Alt at the same time and hold, Vista should pop up a blue page with a menu, XP the Task Manager.

With screws?What do you want to fix?Infos, infos, infos!

Hi, well this can happen because of a bad driver or a bad update, in any event the best way to "Fix" it will be to perform a system restore, please check out the link below it will show you what and how to do this.
http://www.sevenforums.com/tutorials/700-system-restore.html

Hello
You can download the drivers from here
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3658094&lang=en&cc=us&prodTypeId=12454&prodSeriesId=3658082&taskId=135
good luck

please isolate the monitor. try using other good monitor and plug it into your desktop. if the monitor you use doesn't display it means the video card adapter is defective. you have to replace that one. otherwise vice versa.

• Go http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&cc=us&lang=en&lang=en&sp4ts.oid=3785037&ac.admitted=1388852498119.876444892.199480143
• Chose your OS
• DOWNLOAD :.....and install.... INF driver first(Chipset Driver)

• Then DOWNLOAD install video driver.(Graphic Driver)

When you restart your pc the problem will be solved!.