20 Most Recent Nintendo Wii Fit - Balance Board + Game Console - Page 4 Questions & Answers

Its supposed to do that to setup and recognise it properly theres nothing wrong with it.

You must sync the remote. To do this first take off Battery cover of board.(leave batteries in) Then press the tiny red button on the front of the wii console next to the sd card slot for 2 seconds. Look at the back cover for battery in the board. In the battery compartment there is a tiny red button that looks like the one one the wii. Press it and they should sync. Now your remote should work.

Please rate.

Hi.

You need to re seat the sensors.
I have written a step by step instructions here.

Hope this helps.

Hi.

You need to re seat the sensors.
I have written a great tip on how to fix this issue. Here is the link.

Hope this helps!

Hi.

The sensors needs to be re seated. I wrote a great tip for on how to fix this problem.

Here is the link.

Hope this helps!

1. Insert a Wii Balance Board compatible game disc in the Wii console.

2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

3. Open the small SD Card slot cover on the front of the Wii console.

4. Remove the Battery Cover on the bottom of the Wii Balance Board.

5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.

6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.

7. The blue light will stop blinking and stay on steady once the syncronization is complete

Try these steps!


1. Insert a Wii Balance Board compatible game disc in the Wii console.



2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.



3. Open the small SD Card slot cover on the front of the Wii console.



4. Remove the Battery Cover on the bottom of the Wii Balance Board.



5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.



6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.



7. The blue light will stop blinking and stay on steady once the syncronization is complete

click here to download repair guide if u need

1. Insert a Wii Balance Board compatible game disc in the Wii console.



2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.



3. Open the small SD Card slot cover on the front of the Wii console.



4. Remove the Battery Cover on the bottom of the Wii Balance Board.



5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.



6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.



7. The blue light will stop blinking and stay on steady once the syncronization is complete.

click here to download repair guide if u want

I have tried to sync the board but the blue light stops flashing and nothing happens I have also changed the batteries still nothing happens.

the wii keeps saying step of me and press a when im not on it can anyone help its drivin my mad! please help

You can get the manual on the links below.

http://www.nintendo.com/consumer/gameslist/manuals/Wii_Wii_Fit.pdf

http://www.nintendo.com/consumer/gameslist/manuals/Wii_Wii_Fit_Plus.pdf

Good Luck

Did it properly re-synch?Make sure batteries are in correct,sensor bar is not obstructed and is as far forward wherever it is sitting.I assume you went to Nintendo site for troubleshoot?If not,then if you read it from the manual it is the same information.I used to fix Nintendos.The site also suggests a completely different set of batteries.I use AA rechargable Energizers which I bought at one of the dollar stores for $10,perhaps family dollar.There is an extra 8-pack of them available at K-mart and they last much longer than anything.Also,if you do not use anything battery powered for a long time,remove the batteries.Sorry,I got off the subject but I intend to inform and educate people by supplying as much info as possible with not just the problem at hand but the subject of batteries,period.If none of that works,the balance board circuitry may be bad or the Wii may not be reading the balance board.If you do end up having to send the Wii in for repair,send everything except the games.Send cables,power adapter,remote(s),balance board.If anything is bad it will be replaced.I worked at United Radio in NY and depending on where you are,they may have you send it there.Here is the Nintendo link.If you have any questions,just comment here and I will get an autolink and reply ASAP.Good luck,Greg

http://www.nintendo.com/consumer/systems/wii/en_na/ts/balanceBoard.jsp

The switch on a Wii balance board is not one that stays in, it is not a spring loaded toggle switch. Also it will only stay on if you are in a game that uses it (like Fit, or a select few others). This is a battery save feature. If you are not logged in to a game that uses it the balance board senses that it is useless and turns off after a couple of seconds. This is true even if you have a game that uses it in the Wii but you are in the menu.

i am having the same problem. i phoned the help line who told me to take the batterys out, turn the board up side down and leave it for 8-10 hours, they replace batteries and problem may be fixed. if not, they said i will just have to buy a new 1!!! if you find any other solution (turning it up side down didnt work for me) PLEASE e-mail me!!!
[email protected]

thanks

Check the board if there are some loose connections that you can fix...

If problem still persist have it check for warranty purposes.

This is a rare problem ............ i faced similar kind of problem
i solved my problem with the help this repair guide you can also try this out i hope this will help you a lot .......
all the best
Click Here

I STEP ON MY WII FIT AND IT CRACKED WHAT SHOULD I DO AND I THOUGHT THEY SHOULDNT CRACK

there are series of problem in wii which can be solved without much technical knowledge ........ your problem belong to that so dont worry i will give you the link to download the wii repair guide that will help you a lot Click Here

Sensor fault easily fixed by reseating steal plate on feet.
Need a special screwdriver bit to remove plate and reseat it.
Each foot has 3 posi-drive screws to remove cover, then use special star bit to remove plate and then reseat it.
Make sure you have a good set of batteries.
DO NOT USE "RECHARGE PACKS" as they can permanently damage the control board.
Hope this helps.