Top 10 Sony Ericsson Satio Cell Phone Questions & Answers

easy.click on messages, options, sim messages, mark all and delete and your box will stop flashing

I believe that you go into settings/personal/profiles. There you can highlight an existing profile or create a new profile. When you highlight a profile you can select option button, then tap personalise and this with give you options to change ringtones, ring type, message alerts etc. Hope this helps

i had the same problem and i went on sony ericsson website and updated the software on my phone and it works perfect so hope i've been a help :)

there may be promlem in ur contact setting so try this.....

go to contact option then open setting

there may be many options like contact view e.tc
u choose in these option "name and number"

menu>settings>personal>profiles>whatever profile u use eg normal>personalise>message alert! what a rigmarole eh lol

I have the same problem! Tried everything from '0000', '00000', '12345'. Still locked. Help!

front camera is for video calls only

The best unlock code for Sony ericsson model mobile,
you may try this site http://www.theunlockarena.com/sony-ericsson/rs13wp8/
It has the step by step instructions and easy methods for unlocking mobile phones...................

Hi,
The replacement of the touch screen is very simple.The cost of touch screen is £28.99.Have you calibrated your phone?

The steps to recalibrate is quite simple
Go to control panel menu-Setup wizard
tap 'YES' before cancel appears.Do this until you see 1,2,3,4
numbers blinking...
If still your problem is not solved this will be caused because of two reasons
1)Touch screen- will not work only when you drop it or Liquid in it is damaged.
2)Touch screen sensor
2)Keypad IC.

Touch screen sensor or keypad IC cost is very less you can replace it or solder it if it is loose.If you don't have hands on in it please don't try it you can take it to nearest service center.

The replacement of Touch screen is quiet simple.
The replacement can be done.follow the steps.
1)remove the battery and Sim card.
2)You can find screws now.so open the back and front panel
3)Be careful the LCD and the flex is being joint.so care fully remove it see how the flex is joint with the motherboard.there will be thin film like connection between the two.
4)Take the LCD you bought..In the image you can see gold type film that is flex.you have to place it perfectly.That's it
5)Close the phone.and now enjoy working with it.



Please do rate the solution if the issue is resolved or post a comment for further assistance.


thank you for using fixya have a nice day:-)

i buy the sony ericsson 2nd n i wont to format this fhone but first owner this fhone has change the lock code. so whats cant i doing to f0rmat this handfhone sony ericsson satio u1i????