20 Most Recent
Vivitar ViviCam 8025 Digital Camera - Page 7 Questions & Answers
VIVITAR VIVICAM 8025 FLASH WONT GO ON
Make sure you're not in macro mode. There's a slide switch on the end of the camera, near the USB socket. Slide it away from the flower toward the mountain.Bear in mind that the flash is for still photos only, not for videos.
Just bought the camera and
You can get the software and the manual
here.You don't need to use the Vivitar software. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as
Picasa.
Vivitar image management software disk will not
You can get the Vivitar software
here. Just click on the "Vivitar Experience Software" link.You don't need the Vivitar software, though. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as
Picasa.
Flash not working
First, be aware that the flash only works in still mode, not in video mode.Second, check the macro/far switch on the left end of the camera. The flash won't fire if this switch is in the macro position (flower icon).
HOW TO ACTIVATE THE FLASH
First, be aware that the flash only works in still mode, not in video mode.Second, check the macro/far switch on the left end of the camera. The flash won't fire if this switch is in the macro position (flower icon).
I can't get the software installed
You don't need the Vivitar software.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as
Picasa.
I put in my cd software and nothing happens
You can get the Vivitar software by going
here and clicking on the "Vivitar Experience Software" link.You don't need the Vivitar software to use your camera. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as
Picasa.
COMO LE KITO EL CARDPROTECTED?
ALGUIEN
SD and SDHC cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.
When I attempt to take
The camera only holds one picture, and that only until you turn the power off. To take and store pictures, you need a memory card. The 8025 uses SD and SDHC cards up to 8GB in size. These cards are available at just about any department, electronics, and office-supply stores.
Camera focus permanantly blurred
There's a slide switch on the left end of the camera, near the USB socket. Slide it to the appropriate position for your pictures. The flower position is for subjects very close to the camera, the mountain position is for everything else.
Record a video but when playing it you can't hear
The 8025 is designed primarily as a still camera with some video features grafted on. As such it captures images but not sounds. You can add a soundtrack using video-editing software on a computer, but you cannot record one on this camera.
Why are my pictures coming out blurry?
There are three main reasons for blurry pictures.Pictures may come out blurry if they're not focused properly. If some objects are sharp and others are not, this may indicate focusing on the wrong subject. This is usually not a major problem with compact point&shoot cameras since they have such a wide field of focus that almost everything will be in focus anyway. However, make sure the macro/far switch is set to the appropriate position for your picture.Subject motion. If moving objects blur while stationary objects remain sharp then the shutter speed is too slow to freeze the motion. Try switching to the sports mode, and/or add more light.Camera motion. This is the most common cause. Set your camera on a table or other stable surface and use the self-timer to take a picture. Take another one while holding the camera. Compare the two on your computer.
Not finding what you are looking for?