Lorex 4 Channel Home Surveillance System - Answered Questions & Fixed issues

INSTALL A EXTERNALL ILLUMINATOR IN VIEW AREA IT HAS IT'S OWN POWER SUPPLY , AND NEED NOT BE NEAR CAMMERA ONLY IN IT'S VIEW AREA THIS WILL INCREASE BRIGHTNESS OF VIDEO IN DARKNESS

Hi,

Check the exact model of the dvr and get your manual here

Cheers
TeaCii
If you own website, addlive support almost free
Realsecurity guard to watch your cctv for $1/day

The Lorax MC2700 is a portable radio that does not have Wi-Fi or Bluetooth connectivity. As a result, it cannot be viewed or controlled from a phone or other device. It can only be controlled using its physical controls

If your Lorex DVR won't turn on, it is likely that the power cord is not properly connected. Make sure that the power cord is securely connected to the DVR and that the power switch is in the "on" position. If the problem persists, you may need to replace the power cord or contact the manufacturer for assistance.

https://help.lorextechnology.com/link/portal/57356/57366/Article/1299/DVR-NVR-Default-username-and-password

Not from us! We are Fixya dot com, we aren't Lorex. Here is a link to their Support. https://help.lorextechnology.com/ ..

Lorex Firmware Updates ' Lorex

www.lorextechnology.com > support > Firmware

download the lastest firmware for you lorex products such as dvr, nvr and security cameras, you will be able to upgrade your system upgrading your firmware.

Contact Lorex directly to request a manual for model SG6153.

Contact Lorex directly to inquire.

Free online instructions: https://www.lorextechnology.com/downloads/discontinued-b4-2010/SG6153_TRIFOLDQSG_EN_R6_PAL.pdf

https://www.youtube.com/watch?v=hVr-DlmNock

needs to port forward in router at home. this means outside global world >>> Your router Global IP ADDRESS >> .....YOUR Home Router .....>> Port forward >> internal IP address Camera using on your home network https://www.youtube.com/watch?v=SEKqtc5bnxU

would first check the plug in power unit is giving correct output (by substitution) first .

red + 12v black - yellow video out green video ground

Replace the power adapter.

hi its hard to retrive the deleted footage but try this one

Hiren's BootCD 15.2 ' Hiren's BootCD PE its a boatble via usb thiers a lot of option to revoder deleted files

NORMAL ON POWER UP , IT;S TELLING YOU POWER HAS BEEN CYCLED AND OPERATOR NEEDS TO CK THAT SYSTEM HAS RESTORED CORRECTLY ,USE MOUSE TO CLICK BELL ON BOTTOM EDGE OF HOME SCREEN TO CANCEL BEEP !

https://help.lorextechnology.com/link/portal/57356/57366/Article/1534/Recorded-Video-Slow-playback

This is caused by one of the alarm settings. It could be as simple as motion alarm. It can also be a bad or no hard drive or video loss. So the best thing to do is check everything and turn off the motion alarm and any other alarm you want to turn off. It's all in the admin settings under alarm. Good luck.