Sylvania LD320SSX LCD TV - Page 8 - Answered Questions & Fixed issues

Here's a PDF: https://www.manualslib.com/manual/720948/Sylvania-Sc-11100.html

We have no manuals, but try entering your information on your search engine of your computer. You should be successful.

Vertical scan output section circuit fault. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ Type in this key phrase " my service table today " in the search box at the top right of the display window of the home page, to get gathered some pages which has the details of practical experiences to the author of that site.

Something may have happened in the DVD unit to take out the main fuse in the power board, start by checking that

Hello... Somewhere in the same menu as the Air/Cable setting should be an option to scan for channels. It might be called Auto-Program, or something similar. The bad news is that: "On June 12, 2009, the Federal Communications Commission (FCC) mandated that all U.S. based television signals must be transmitted digitally." Since your TV was manufactured in 1992, it isn't capable of detecting or displaying digital channels. If you're really fond of the TV, you will need some sort of conversion box. If you can afford to, I'd recommend buying a new TV, and get the extended warranty. I hope this helps!

This may be a stretch, but I had a similar prollum and don't have the TV remote. I have DirecTV, and I accidently fixed the prob by pressing (and holding) the ENTER button on my DirecTV remote. It's next to the 0 (zero) on the number pad. That's all I can tell ya. If you don't have DirecTV or some other remote, dunno what would help. Jim

Chances are its a panel issue

Remove the stand first then all the screws with arrows marked on the case...it should come off then...Try removing and re connecting the LVDS cable along with the ones that go from the TCON board to the panel but use extreme caution when removing those. There is a greater chance of a bad TCON board than bad cables

Get new batteries for remote and go to web site for manual download. Or google for it.

Use the zoom feature on the remote to shrink it down.

Replace it by warranty.

If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Your tv may not be compatible with progressive scan mode. Change the latter.

I see no question here?

That part number BA71F0F01042 is for the power supply. You can find someone on Flea bay that are selling it. Where did you find the other part number?

Check this video out. How to replace lithium battery on Philips portable DVD player for less...

HELLO THERE YOU NEED BUY NEED MANUEL AND SEARCH MODEL AND NUMBER

Yes. One at just 2KM away. "Hitlers' channel"

Do a factory reset to this set, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.